Caster Upgrade

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

User avatar
Platinum Member
Posts: 1883
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Caster Upgrade

Post by chapmanruss »

JPG said,
I think a washer or two will make it closer to 'perfect'.
JPG you are correct. Yesterday Bruce and I were looking at how the original caster sits in the sleeve and there is just under a 1/8" gap.
Model 10 Caster.jpg
Model 10 Caster.jpg (209.19 KiB) Viewed 4631 times

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. 10E S/N 1033 & Mark 2 to be restored.
Gold Member
Posts: 128
Joined: Tue Oct 02, 2018 8:44 am
Location: Vancouver USA

Re: Caster Upgrade

Post by amboyna »

Russ showed me how the top of the post actually bottoms out when slipped in to place. So even though the original caster and the new caster have the exact same profile of 2" it is still a little off.
The place I bought the new casters claimed there is no caster made with a 1 11/16" post. At least he did not carry one.
As JPG stated it could be fixed with a washer. But with warmer weather I am too busy making sawdust to try and fix it. :)
Shopsmith 10E S/N 5804 restored.
Shopsmith 10ER S/N R39267; purchased 10-10-50 in San Francisco.
Bruce Brenner
Post Reply