Thread locker on DC3300 Dust collector fan to motor bolt?
Moderators: HopefulSSer, admin
-
- Silver Member
- Posts: 11
- Joined: Thu May 02, 2019 5:25 pm
Re: Thread locker on DC3300 Dust collector fan to motor bolt?
I wanted to fill everyone in on the Thread type on the motor. It is standard thread righty tighty lefty loosey! I had to put new seals on the newly acquired DC3300. This time the motor bolt came right off no real problem. I am thinking the previous owner of the first one I acquired used red thread locker. It will have to go to a machine shop to get it drilled and have the re-tap the hole.
Re: Thread locker on DC3300 Dust collector fan to motor bolt?
You know to remove the nut with red thread locker, use heat to loosen it.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob