2 1/2" jointer cutter

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderators: HopefulSSer, admin

Post Reply
DannyTufford
Bronze Member
Posts: 2
Joined: Sun Jan 31, 2021 12:42 am

2 1/2" jointer cutter

Post by DannyTufford »

I have the shaper/jointer fence with my 10er, have the shaper cutter arbor but do not know what the jointer cutter arbor-spindle looks like. Anyone know?
Top
User avatar
rpd
Platinum Member
Posts: 3045
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: 2 1/2" jointer cutter

Post by rpd »

It fits directly on the spindle, no arbor required. The hole on the outside end is smaller, so it can only go on in the correct orientation.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Top
User avatar
chapmanruss
Platinum Member
Posts: 3481
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: 2 1/2" jointer cutter

Post by chapmanruss »

Below is a picture of the Jointer Cutter Head. Note the 2 set screws that hold it directly on the Quills 5/8" Spindle. The set screws will be either 1/4" (Model 10s) or 5/16" (Mark 5).

_
Jointer Cutter 12 230.jpg
Jointer Cutter 12 230.jpg (109.63 KiB) Viewed 385 times
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Top
Post Reply

Return to “Maintenance and Repair”