Wiring on Emerson 1 1/8hp

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderators: HopefulSSer, admin

Post Reply
flyguysr5
Silver Member
Posts: 8
Joined: Mon Jul 05, 2021 10:39 am

Wiring on Emerson 1 1/8hp

Post by flyguysr5 »

Took mine apart to clean the contacts and my pics on wiring placement got deleted. Can someone describe where each wire goes? Only one blue that has a narrow spade connector is a given. thanks
Top
User avatar
chapmanruss
Platinum Member
Posts: 3480
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Wiring on Emerson 1 1/8hp

Post by chapmanruss »

On Everett's google drive is a document called MOTOR GUIDE which may be of some help. It is at the link below.

https://drive.google.com/drive/folders/ ... 0Jib6u7NNO

I don't recall which motors I have in my 2 Mark V headstocks and it would require some work to check and get pictures. Right now I am unable to work in my shop due to an injured knee.
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Top
flyguysr5
Silver Member
Posts: 8
Joined: Mon Jul 05, 2021 10:39 am

Re: Wiring on Emerson 1 1/8hp

Post by flyguysr5 »

Russ,

Looked through all of those with no luck on my particular model. Still looking.......
Top
User avatar
JPG
Platinum Member
Posts: 34632
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Wiring on Emerson 1 1/8hp

Post by JPG »

Picture!!!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
flyguysr5
Silver Member
Posts: 8
Joined: Mon Jul 05, 2021 10:39 am

Re: Wiring on Emerson 1 1/8hp

Post by flyguysr5 »

JPG, I can not get your pic to open. I have the program so it should. Can you try a different format? Sorry to be such a pain....
Top
RFGuy
Platinum Member
Posts: 2743
Joined: Mon Dec 31, 2018 8:05 am
Location: a suburb of PHX, AZ

Re: Wiring on Emerson 1 1/8hp

Post by RFGuy »

flyguysr5 wrote: ↑Tue Jul 06, 2021 5:10 pm JPG, I can not get your pic to open. I have the program so it should. Can you try a different format? Sorry to be such a pain....
JPG is requesting you post a picture of your motor, etc. Pictures are tremendously helpful when requesting help on this forum, but often new members don't post them which makes it difficult to give them help.
📶RF Guy

Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Top
flyguysr5
Silver Member
Posts: 8
Joined: Mon Jul 05, 2021 10:39 am

Re: Wiring on Emerson 1 1/8hp

Post by flyguysr5 »

Pics of motor

Image
Attachments
IMG_3456.jpg
IMG_3456.jpg (215.88 KiB) Viewed 687 times
IMG_3457.jpg
IMG_3457.jpg (387.09 KiB) Viewed 687 times
Top
User avatar
JPG
Platinum Member
Posts: 34632
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Wiring on Emerson 1 1/8hp

Post by JPG »

Need a pix of the other side of the start switch board looking in from the outside of the motor end cap.

Also the terminal end of the start capacitor.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
flyguysr5
Silver Member
Posts: 8
Joined: Mon Jul 05, 2021 10:39 am

Re: Wiring on Emerson 1 1/8hp

Post by flyguysr5 »

New pics per request. Maybe this will help me with the wire locations.
Attachments
IMG_3479.jpg
IMG_3479.jpg (337.67 KiB) Viewed 622 times
IMG_3480.jpg
IMG_3480.jpg (327.9 KiB) Viewed 622 times
IMG_3481.jpg
IMG_3481.jpg (219.51 KiB) Viewed 622 times
IMG_3482.jpg
IMG_3482.jpg (310.06 KiB) Viewed 622 times
Top
User avatar
JPG
Platinum Member
Posts: 34632
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Wiring on Emerson 1 1/8hp

Post by JPG »

Yes that helps. Will scope it out later today.

May need a couple of continuity checks on the wires, but hopefully not.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Maintenance and Repair”