WTB part N/A from SS
Moderators: HopefulSSer, admin
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
WTB part N/A from SS
I hope it's ok to ask to buy parts or for pointers to sources here! If not, please let me know.
This greenie I just acquired is missing the knurled aluminum collar that fits the end of the quill. I presume I want one else SS wouldn't have installed it originally. SS call it "spindle knob" and the last part number for it appears to be 518204.
Anyone have one they'd like to part with?
Thanks!
This greenie I just acquired is missing the knurled aluminum collar that fits the end of the quill. I presume I want one else SS wouldn't have installed it originally. SS call it "spindle knob" and the last part number for it appears to be 518204.
Anyone have one they'd like to part with?
Thanks!
- Attachments
-
- headstock.jpg (38.86 KiB) Viewed 8016 times
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
- JPG
- Platinum Member
- Posts: 34643
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: WTB part N/A from SS
PM me yer snail mail address.
It is an important part.
It is an important part.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 34643
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: WTB part N/A from SS
Post a pix of the quill end so we can be assured we be thinking of the same part.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: WTB part N/A from SS
Here's what I've got
- Attachments
-
- IMG_6281.jpeg (177.86 KiB) Viewed 8002 times
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
Re: WTB part N/A from SS
Yeah, they don't sell that by itself, you'd have to buy a whole new quill from them. Even on eBay you would probably have to buy a whole quill.
Have to go through my parts. If I have something I'll PM you about it. As a new member you may not be able to respond by PM but we'll work something out.
Have to go through my parts. If I have something I'll PM you about it. As a new member you may not be able to respond by PM but we'll work something out.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: WTB part N/A from SS
Thanks, Ed! I've also PMed JPG as he requested above. Sounds like he might have one.
Cheers!
Cheers!
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: WTB part N/A from SS
...or maybe not. It's sitting in my outbox, not my sent box. So maybe I'm not yet able to send PMs....I've also PMed JPG
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
Re: WTB part N/A from SS
It will sit in the Outbox until the recipient reads it. After they read it the first time, it will be in the Sent box. PM's should work for you and sounds like it is.HopefulSSer wrote: ↑Tue Oct 12, 2021 9:15 pm ...or maybe not. It's sitting in my outbox, not my sent box. So maybe I'm not yet able to send PMs....
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: WTB part N/A from SS
Another new member had a problem sending PMs right away. Maybe an admin has to set up permission.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: WTB part N/A from SS
I'm sure our new member is interested in the function of the spindle knob. This thread goes into the subject in depth:
viewtopic.php?f=6&t=7095&hilit=spindle+knob
viewtopic.php?f=6&t=7095&hilit=spindle+knob
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER