bucksaw wrote:Where did you purchase your Fafnir PN202KDD5C1? I have been looking and I've only been able to locate C0 (normal) radial clearance.
bucksaw - Got the bearing from Applied Industrial Technologies here in San Diego. They are close to where I work.
Oddly, when I went to their website to get you the link for the bearing, it showed the detail for the part number I have on my invoice, Fafnir PN202KDD5 as a "C0" (nominal clearance). See this linkand enter the PN and Fafnir and you'll see what I mean. So I went out and looked at the box that my bearing came in. The box is a "TIMKEN" and it showed the same part number 202KDD5 but there is a sticker attached to it that shows the "C1" designation. When I documented the "C1" indicator in my post, I was going by the label on the box.
-
-
[ATTACH]4350[/ATTACH]
-
-
-
Anyway, my next logical step was to look at the actual bearing on the quill itself. Here it is:
-
-
[ATTACH]4351[/ATTACH]
-
-
It clearly shows "202KDD5 C1 FS 50000" and the Fafnir name on it.
Anyway, if your looking to get one, call the website and talk to someone specifically OR I can see what I can do for you on my end here.