Recumbent bicycle repair
Moderators: HopefulSSer, admin
-
- Gold Member
- Posts: 242
- Joined: Sun Aug 19, 2007 10:47 pm
Recumbent bicycle repair
Wore out an idler wheel on my recumbent exercise bike and didn't want to spend $70.00 for a new idler assembly that was out of stock anyway. I may have used every Shopsmith I own. I reused the bearings that were in the nylon? idler wheel and everything is back together. I know it needs a new belt and they are still in stock but I'm too cheap to give $95.00 until this one breaks. So far I've spent $6.00 on a piece of 2x4x4 Jatoba(Brazilian Cherry). Pictures below maybe. First attempt using the new forum style. Ahh, I like drag and drop for posting pics now, couldn't do that before, or at least I couldn't.
Larry Hargrove
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Re: Recumbent bicycle repair
Well done,
I'm with you on this, love repairing stuff if I can.
What size is the axle bolt for the idler, I am wondering if a skateboard wheel would work in the unlikely event that the wooden one fails.
I'm with you on this, love repairing stuff if I can.
What size is the axle bolt for the idler, I am wondering if a skateboard wheel would work in the unlikely event that the wooden one fails.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
-
- Gold Member
- Posts: 242
- Joined: Sun Aug 19, 2007 10:47 pm
Re: Recumbent bicycle repair
10mm. The bearings were NBK6000Z. Picture 39 shows the lip on one side of the wheel and I never saw anything close to that on the web and I didn't know if it was really needed. I can't imagine I'll ever peddle hard enough to ruin the wooden one, the Jatoba is really hard.
Larry Hargrove
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Re: Recumbent bicycle repair
Okay, I am sure you are correct, not a high stress application.
The skate board bearings are only 8 MM so no go there.
The skate board bearings are only 8 MM so no go there.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: Recumbent bicycle repair
This is my vote for Best Thread today!
-
- Gold Member
- Posts: 242
- Joined: Sun Aug 19, 2007 10:47 pm
Re: Recumbent bicycle repair
Thanks
Larry Hargrove
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Re: Recumbent bicycle repair
Very cool repair. Now I'd be tempted to replace the other parts with wooden ones.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
-
- Silver Member
- Posts: 14
- Joined: Fri Jan 03, 2014 9:23 pm
Re: Recumbent bicycle repair
Have you considered having some HDPE plastic on hand for such repairs?
This is water bottle cap and detergent bottle plastic. Lots of youtube videos on recycling this stuff. Shapes with wood working tools. Oh, it's cutting board plastic if you're you don't have time to collect recyclables.
This is water bottle cap and detergent bottle plastic. Lots of youtube videos on recycling this stuff. Shapes with wood working tools. Oh, it's cutting board plastic if you're you don't have time to collect recyclables.
-
- Gold Member
- Posts: 242
- Joined: Sun Aug 19, 2007 10:47 pm
Re: Recumbent bicycle repair
Found some interesting videos and I might try single piece if I had one big enough but I don't think I would want to try a mixture after seeing how air bubbles could affect the outcome. I wonder how hot it can get before it starts to soften. Thanks for the suggestion.
Larry Hargrove
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?
Rock Island, Ok
1981 Mark V 500>510>520(98922)
19?? Mark V 500>Power Pro headstock 556176 06-17-11 factory exchange program original serial unknown
1957 Mark V 500 (350389)
1953 10ER
Another 10ER
Bandsaw 2012 Jointer 2012
Bandsaw, Jointer, other goodies
Craftsman table saw, Delta 46-460 Midi lathe
SS 6” Belt Sander w/power stand 1970’s?