Well I did it
Moderators: HopefulSSer, admin
Well I did it
I seen these marking squares and thought I would give them a try , I am not much into the metric system but thought I would give them a try , for under 20 bks . https://usa.banggood.com/T50T60T100T160 ... s=category they said these have 5 dots instead of 4 and is supposed to be a little easier to use , if nothing else they will look good on the bench .
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- mountainbreeze
- Platinum Member
- Posts: 508
- Joined: Sun Jan 30, 2011 9:58 pm
- Location: Taylors, South Carolina
Re: Well I did it
All 5 for under $20 is a good deal!
Re: Well I did it
I think my receipt said it was just for the one , the link could be deceiving . all three would be real deal. they seem to have pretty good reviews .
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
-
- Bronze Member
- Posts: 1
- Joined: Fri Jun 04, 2021 8:56 am
Re: Well I did it
Oh, really nice price. I think that is only for 1-st deal!
Last edited by WandaWatson on Tue Jun 08, 2021 11:32 am, edited 3 times in total.
Re: Well I did it
it arrived today, at first glance it seems to be built solid and the square appears to be accurate .small but accurate .
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
Re: Well I did it
Glad you got what you ordered from them. They sent incorrect items for the past few things I bought from banggood. Also some damaged items in shipping.
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: Well I did it
Hope they made it right. I checked a couple other squares of mine against it and so far it seems to be spot on . I am not a metric person so I will mostly use to to set the fence, square a miter gage and square up the table saw etc.
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)