Fence straddler
Moderators: HopefulSSer, admin
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Fence straddler
While I was sorting out the problem with my miter gauge I made a LOT of crosscuts. Since I had all these pieces I decided to make a fence straddler (or at least what I think this is what a fence straddler is.... Hopefully will be useful whatever you call it....)
- Attachments
-
- IMG_6375.jpeg (157.53 KiB) Viewed 2020 times
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
Re: Fence straddler
I like that orangish color-what is that?
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: Fence straddler
Bad lighting it's just plain unfinished pine under 2700K LED bulbs
That said I got a nice orangish color on another project from a 50/50 mixture of boiled linseed oil and something I don't recall at the moment. I'll look in the shop tomorrow and see if I can recreate what I did! (Maybe turps?)
That said I got a nice orangish color on another project from a 50/50 mixture of boiled linseed oil and something I don't recall at the moment. I'll look in the shop tomorrow and see if I can recreate what I did! (Maybe turps?)
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: Fence straddler
It was 50/50 BLO and mineral spirits on the other project. Though I've also found Waterlox tung oil gives a nice color as well.
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466