3/4” Blade on Shopsmith Bandsaw?
Moderators: HopefulSSer, admin
3/4” Blade on Shopsmith Bandsaw?
I found a local saw shop that makes blades. But they don’t make 5/8” blades. I need to replace my resale blade and was wondering…has anyone tried a 3/4” on a shopsmith bandsaw?
Re: 3/4” Blade on Shopsmith Bandsaw?
I don't think that is recommended. A 3/4" blade may hang off the wheel which is not recommended. I have done a limited amount of re-sawing with the 1/2" blade with success.
Bill V
Bill V
- chapmanruss
- Platinum Member
- Posts: 3449
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 3/4” Blade on Shopsmith Bandsaw?
I agree with Bill. Using a 3/4" Blade would have it hanging over the front edge of the tires/wheels and probably not a good idea. I have used 1/2" Blades for resawing too and it worked fine.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: 3/4” Blade on Shopsmith Bandsaw?
Years ago I had a 5/8" blade on my bandsaw. Right now the widest one I have is a 1/2". I have not tried anything wider than the 5/8" one.