Has anyone done one of mr reids or the ShopSmith webinars ? and approximately how long do they last, how much bandwidth is needed? and is a mic & Cam needed ??
we are out in the rural and my internet drifts between 5 meg and 11 meg down "a real good day".
thanks
Webinar
Moderators: HopefulSSer, admin
Re: Webinar
You need a mic and a cam if you want to participate interactively. Otherwise you can just watch. Your internet speed should be just fine.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Webinar
I did one years back with a lot less bandwidth without any problems. No one else joined the webinar so it was just me and Doug. I don't really remember what the subject of the webinar was, maybe a PowerPro introduction, but I do recall it was the first time I saw a floating table set up as an outfeed table.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
- thedovetailjoint
- Gold Member
- Posts: 237
- Joined: Tue Dec 23, 2008 6:01 pm
- Location: High Point, NC
- Contact:
Re: Webinar
I sat in on one and really enjoyed it. Doug is so knowledgeable and open to most any question. My connection was weak and I had no issues. Scott
http://www.Youtube.com/user/MyGrowthRings
http://Shopsmith-Tool-Hunter.Blogspot.com
http://www.Tool-Hunter.com
http://Shopsmith-Tool-Hunter.Blogspot.com
http://www.Tool-Hunter.com
Re: Webinar
Troy,
I'm a bit late here at your thread but in case it helps anyone: I just attended one of Doug's webinars and it was a bit over 30 mins long. I don't have a microphone so I just typed whatever I needed to say in the chat thingy on the side of the screen. Doug has a good audio connection and it was not a problem hearing him.
I'm a bit late here at your thread but in case it helps anyone: I just attended one of Doug's webinars and it was a bit over 30 mins long. I don't have a microphone so I just typed whatever I needed to say in the chat thingy on the side of the screen. Doug has a good audio connection and it was not a problem hearing him.