Heads Up - Bargain 'available'
Moderators: HopefulSSer, admin
Re: Heads Up - Bargain 'available'
If this lathe duplicator is unused and like new as is claimed it's probably a decent deal at $150.
https://boston.craigslist.org/sob/tls/d ... 12016.html
As summer goes on some asking prices continue to drop, but some new listings are absurdly high. Some are up in the thousands for Model 500 machines. They look clean and have a lot of accessories extra, but no where near those prices in value. Used Shopsmiths have little inherent value, it's all about local supply and demand, and around here the supply far exceeds the demand.
https://boston.craigslist.org/sob/tls/d ... 12016.html
As summer goes on some asking prices continue to drop, but some new listings are absurdly high. Some are up in the thousands for Model 500 machines. They look clean and have a lot of accessories extra, but no where near those prices in value. Used Shopsmiths have little inherent value, it's all about local supply and demand, and around here the supply far exceeds the demand.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: Heads Up - Bargain 'available'
The table is in bad shape, a fairly large chunk appears to be broken off in the front left corner. Still a great deal IMO if there is no significant damage to anything else. These OARs are a bit hard to come by, and tend to command a good price on the used market. I have one and love it.Majones1 wrote: ↑Sun Jul 25, 2021 11:12 pm $50 for what they call “ShopSmith”, and it’s a bad angle photo, but looks like it may be an Overarm Pin Router to me. In Riverside, California, which is a couple hours north of San Diego and east of Los Angeles.
https://inlandempire.craigslist.org/tls ... 56699.html
- David
Re: Heads Up - Bargain 'available'
I was very hesitant after having just received MickyD’s equipment; I had just figured out how to make it all fit in my garage and couldn’t imagine squeezing one more tool into the little space. So with your encouragement I decided, WTH, why not try?!? Too late, it was already sold. Bummer, it would have been nice to have that in my toolset.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Heads Up - Bargain 'available'
10ER that looks in reasonably good condition for $200. Needs a switch.
https://roanoke.craigslist.org/tls/d/ro ... 52993.html
https://roanoke.craigslist.org/tls/d/ro ... 52993.html
Mark 7 Power Pro, Mark V 510, Mark VII (early 1960s) Headstock wall mount drill press on Mark 5 way tubes, Mark 5 Shorty with reversible motor, Overhead Pin Router, Power station with band saw, Jointers, Belt Sanders, Strip Sander, Scroll saw, Jigsaw, Shopsmith Lathe Duplicator, Craftsman 2.5 hp 13" Planer/molder, Craftsman 5 hp 12-inch planer molder, myriad Shopsmith accessories, Harbor Freight sawmill with extensions to cut 22' logs.
Re: Heads Up - Bargain 'available'
At $200, If you’re looking for an old Mark VII this looks like quite a deal, especially since it comes wit a bandsaw , Jointer, and a bunch of original supplies. It’s up the coast from Los Angeles, in Port Huneme. The ad includes more photos.
https://ventura.craigslist.org/tls/d/po ... 68793.html
https://ventura.craigslist.org/tls/d/po ... 68793.html
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Heads Up - Bargain 'available'
This Mark V looks like it and the SPTs are in good shape. Has bandsaw, jointer, blades, and covers. In Coachella Valley, near Palm Springs.
https://palmsprings.craigslist.org/tls/ ... 36870.html
https://palmsprings.craigslist.org/tls/ ... 36870.html
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Heads Up - Bargain 'available'
Here's two Mark 5s in San Diego's Old Town for $650 each. I'm not saying these are great deals, but there's some other things that someone may be interested in, such as a jigsaw, bandsaw, jointer, and two sprayers(?), as well as a bunch of parts and original manuals and documentation. The manuals include a "Confidential, Not for Customer Use" hard cover book; not sure what that is.
https://sandiego.craigslist.org/csd/tls ... 28912.html
. .
https://sandiego.craigslist.org/csd/tls ... 28912.html
. .
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Heads Up - Bargain 'available'
Heads up if you have a Mark VII. There is a motor and switch for sale on eBay. This is the first one I have seen, and i was looking for a long time. I'd consider it myself, but recently bought an entire second machine.
Thanks, Mike
https://www.ebay.com/itm/Vintage-60s-Sh ... 632-2357-0
Thanks, Mike
https://www.ebay.com/itm/Vintage-60s-Sh ... 632-2357-0
ShopSmith Mark VII (406982), with Band Saw, Jig Saw, Belt Sander, and Jointer
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
ShopSmith Mark VII (400457), (working backup or parts machine)
12" Craftsman Band Saw (113.243311)
12" Craftsman Powered Hacksaw (108.1501)
12" Atlas Commercial (3990) 12" Back Geared, Undermount, Screw Cutting Lathe with Quick Change Gear Box, Taper, Milling and Grinding Attachments
Atlas MFC Horizontal Milling Machine with Vertical Milling Attachment
Atlas 7B Metal Shaper
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
WOW lotta RUST on the motor pan???? Indicates moisture long term. Be good idea to dry it out thoroughally.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Heads Up - Bargain 'available'
This one is in Tulsa area. $300 for Mk 5 and Bandsaw. Looks to be pretty clean. needs belt put on motor runs grate Call John (918-698-7571) No texting or email
https://tulsa.craigslist.org/tls/d/brok ... 23237.html
https://tulsa.craigslist.org/tls/d/brok ... 23237.html
- Attachments
-
- SS1 tul.JPG (32.8 KiB) Viewed 1104 times