Heads Up - Bargain 'available'

Moderator: admin

lew
Silver Member
Posts: 15
Joined: Wed Jun 16, 2021 9:45 am

Re: Heads Up - Bargain 'available'

Post by lew »

Not sure if it's still available, but the Greenie is showing up.. https://boston.craigslist.org/gbs/tls/d ... 25023.html
edma194
Platinum Member
Posts: 774
Joined: Fri Jun 19, 2020 4:08 pm

Re: Heads Up - Bargain 'available'

Post by edma194 »

lew wrote: Sun Sep 05, 2021 4:30 pm Not sure if it's still available, but the Greenie is showing up.. https://boston.craigslist.org/gbs/tls/d ... 25023.html
Didn't notice your post before. Maybe a sale didn't go through. Ad is gone now, somebody surely picked it up as a deal.


Here's a more recent ad. Not the greatest deal on earth, but I'd say typical around here this year for machines that are not outrageously priced. The motor has been replaced. I'd ask him to come down in price, doesn't even include a bandsaw or joiner which are very common on used machines. Not sure what to read into the motor replacement, was it heavy use, or not kept clean, or just bad luck with the original motor?

https://vermont.craigslist.org/tls/d/wi ... 83074.html
Ed from Rhode Island

Mark V 510 with PowerPro headstock, Mark V Greenie with 510 headstock, Mark V 500 in progress
Sawsmith 2000 Ultra, 10ER in progress, 10ER undetermined future
User avatar
JPG
Platinum Member
Posts: 32599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (WILDCAT territory)

Re: Heads Up - Bargain 'available'

Post by JPG »

I think it is the headstock that has been replaced. Hard to tell but I think it is a greenie base with newer carriage as well. The drill chuck may be a 3326 off a '10'.

Corroded aluminum parts.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
edma194
Platinum Member
Posts: 774
Joined: Fri Jun 19, 2020 4:08 pm

Re: Heads Up - Bargain 'available'

Post by edma194 »

Could be that. Bench tubes very corroded. If it's a new headstock and has a 2 bearing quill might still be a decent deal. I have a 3326 chuck from a 10ER. That chuck seems almost unused, better shape than several others from Model 500 machines.
Ed from Rhode Island

Mark V 510 with PowerPro headstock, Mark V Greenie with 510 headstock, Mark V 500 in progress
Sawsmith 2000 Ultra, 10ER in progress, 10ER undetermined future
Majones1
Gold Member
Posts: 228
Joined: Sun Jun 06, 2021 1:11 am
Location: San Diego, CA

Re: Heads Up - Bargain 'available'

Post by Majones1 »

Marc Jones

Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
User avatar
JPG
Platinum Member
Posts: 32599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (WILDCAT territory)

Re: Heads Up - Bargain 'available'

Post by JPG »

Location Location Location :( :( :( :mad:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
RFGuy
Platinum Member
Posts: 1763
Joined: Mon Dec 31, 2018 8:05 am
Location: a suburb of PHX, AZ

Re: Heads Up - Bargain 'available'

Post by RFGuy »

Majones1 wrote: Thu Sep 16, 2021 4:13 pm Can all this be included for $600?

https://www.ebay.com/itm/Shopsmith-Mark ... 632-2357-0
It is local only pickup. Listing is incorrect in stating it is "new". Doesn't looks new.
📶RF Guy

Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
edma194
Platinum Member
Posts: 774
Joined: Fri Jun 19, 2020 4:08 pm

Re: Heads Up - Bargain 'available'

Post by edma194 »

To get better than this deal they'd have to pay you to take it away because it's free:
https://boston.craigslist.org/gbs/tls/d ... 84117.html
Ed from Rhode Island

Mark V 510 with PowerPro headstock, Mark V Greenie with 510 headstock, Mark V 500 in progress
Sawsmith 2000 Ultra, 10ER in progress, 10ER undetermined future
Majones1
Gold Member
Posts: 228
Joined: Sun Jun 06, 2021 1:11 am
Location: San Diego, CA

Re: Heads Up - Bargain 'available'

Post by Majones1 »

Majones1 wrote: Thu Sep 16, 2021 4:13 pm Can all this be included for $600?

https://www.ebay.com/itm/Shopsmith-Mark ... 632-2357-0
Notice that the dust collector has a 1 micron bag too.
Marc Jones

Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
redleg
Gold Member
Posts: 234
Joined: Thu May 23, 2013 8:46 pm
Location: Asheboro, NC

Re: Heads Up - Bargain 'available'

Post by redleg »

I just noticed this Wards PowerKraft for sale for $100. If I didn't have a bunch of Shopsmiths already I would buy it.

https://raleigh.craigslist.org/tls/d/ra ... 77722.html
00f0f_2e1M212MapZz_0t20CI_600x450.jpg
00f0f_2e1M212MapZz_0t20CI_600x450.jpg (24.21 KiB) Viewed 228 times
00O0O_2GFxA8Cr3KDz_0t20CI_1200x900.jpg
00O0O_2GFxA8Cr3KDz_0t20CI_1200x900.jpg (96.41 KiB) Viewed 223 times
00505_lsimHALHIfoz_0t20CI_1200x900.jpg
00505_lsimHALHIfoz_0t20CI_1200x900.jpg (86.43 KiB) Viewed 223 times
00W0W_h9IU9Rl3z4Jz_0CI0t2_600x450.jpg
00W0W_h9IU9Rl3z4Jz_0CI0t2_600x450.jpg (45.45 KiB) Viewed 228 times
Edit: Added two more pictures
:D Mark 7 Power Pro, Mark VII (early 1960s) Headstock wall mount drill press on Mark 5 way tubes, Mark 5 Shorty reversible motor, Mark 5 Greenie Shorty, Mark 510 shorty w/PowerPro, Mark 510 (2000 unboxed 2021) Overhead Pin Router, 12" Shopsmith Pro Planer, Band saws, Jointers, Belt Sanders, Scroll saw, Jigsaw, Shopsmith Lathe Duplicator, Craftsman 2.5 hp 13" Planer/molder, Craftsman 5 hp 12 inch planer molder, myriad Shopsmith accessories and Woodland Mills HM126 band saw mill.
Post Reply