Shopsmith Forums

Cincinati Ohio Craig's list looks like a 10 E with a very scarce table lift good luck
DOWeaver

Seller has deleted original post and new post, with title stating $800, is this: https://austin.craigslist.org/tls/d/hut ... 55122.html

A nice clean looking 500, 5 SPTs, and other goodies marked down from $1000 to $800

Edited 8/31/19 to updated Craigslist link

https://washingtondc.craigslist.org/nva ... 27884.html Disclaimer: I do not know the seller or have any financial interest in this sale. I regularly check CL in the San Diego and Hampton Roads areas as I have relatives on both coasts, in hopes of a good find that I could get a relative to purchase and ship to me.

https://sandiego.craigslist.org/nsd/tls ... 69194.html
The Belt Sander is barely visible mounted on left side. Strip sander is not mentioned, but clearly shown. Three Shopsmith brand storage cabinets included, which you don't see come up for sale very often. If you are close by or make a trip to get the above, you might also be interested in a ProPlaner for $350 not far away ... https://sandiego.craigslist.org/csd/tls ... 42875.html Disclaimer: I do not know the sellers or have any financial interest in these sales. I regularly check CL in the San Diego and Hampton Roads areas as I have relatives on both coasts, in hopes of a good find that I could get a relative to purchase and ship to me.

A 10E S/N 1092 in Florida. $200. Worth the price for that early S/N.

https://www.ebay.com/itm/Shopsmith-10E- ... SwVoBc4UZG

10E S/N 1092 in Florida has been for sale on eBay for some time now. You may be able to get the seller to go down in price but he does know it is one of the original 250 Model 10E made and sent out to West Coast Montgomery Ward Stores on November 15, 1947. It has been upgraded at some point to having a metal extension table instead of wood. It does appear to have the original Tailstock and Fence. It is missing or not showing in the pictures the Wood Extension Table, the Extension Bracket and the Top Bar. The Wood Table can easily be replaced and the Extension Bracket & Top Bar show up from time to time.

Note: The original Top Bar between the wood and the Extension Bracket is thicker than the later Top Bar. It also included three screw holes to attach it directly to the Wood Table with wood screws besides the 2 flat head screws with nuts that attach the Wood Table, Top Bar and Extension Bracket together.

chapmanruss wrote:10E S/N 1092 in Florida has been for sale on eBay for some time now. You may be able to get the seller to go down in price but he does know it is one of the original 250 Model 10E made and sent out to West Coast Montgomery Ward Stores on November 15, 1947. It has been upgraded at some point to having a metal extension table instead of wood. It does appear to have the original Tailstock and Fence. It is missing or not showing in the pictures the Wood Extension Table, the Extension Bracket and the Top Bar. The Wood Table can easily be replaced and the Extension Bracket & Top Bar show up from time to time.

Note: The original Top Bar between the wood and the Extension Bracket is thicker than the later Top Bar. It also included three screw holes to attach it directly to the Wood Table with wood screws besides the 2 flat head screws with nuts that attach the Wood Table, Top Bar and Extension Bracket together.

Coincidentally, there is a new member on the Facebook group that just purchased #1099

This a just a screen shot from a Facebook Marketplace post
It shows a speed control and if you have a FB account, the other pictures show an assortment of tools and a jigsaw. The ad says they are located here in the Helena, MT area.

Be well,
Ben

Saw this on CL
https://cnj.craigslist.org/tls/d/sayrev ... 45861.html
in sayerville cnj

First time posting one, hope ok.

The one listed in Bob's post above says

SHOP SMITH 1955 model

By what I can see that is about 5 years to late. The Model 10's were replaced by the Mark 5 in 1954. It is an early Model 10ER.