Happy New Year!
Moderators: HopefulSSer, admin
Happy New Year!
It's a few hours early, but here's wishing all of you and your families a healthy and happy 2016!
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Happy New Year!
Looks like I should get on the bandwagon now too as I will most likely be fast asleep by midnight.
May you all have a glorious and prospers 2016!
Ed
May you all have a glorious and prospers 2016!
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Happy New Year!
Happy New Year all!
Roy
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Re: Happy New Year!
Happy New Year all!
Roy
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Re: Happy New Year!
Happy New Year!
Yup, early to bed for me until the revelers decide to start the fire works. Maybe it will be too cold for most, though I used to rely on certain beverages to (in theory ) keep me warmer.
To those who make it through until the wee hours, have a few for me!
May everyone who reads this (and those who don't) , have a new year of happiness and enjoyment.
Be well,
Ben
Yup, early to bed for me until the revelers decide to start the fire works. Maybe it will be too cold for most, though I used to rely on certain beverages to (in theory ) keep me warmer.
To those who make it through until the wee hours, have a few for me!
May everyone who reads this (and those who don't) , have a new year of happiness and enjoyment.
Be well,
Ben
Re: Happy New Year!
Me too! I will probably be asleep before the ball drops in Times Square. No problem with fire works here. I live too far away from any of them. Besides it is cold. The low this morning was 2.4* and the high today was 18.7*. At 5:45pm it is 13.1*. It will probably go below zero tonight for the first time this year.
HAPPY NEW YEAR to all and I hope 2016 is a good year for every one.
HAPPY NEW YEAR to all and I hope 2016 is a good year for every one.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Happy New Year!
Thank you and I will take all of your wishes personally, and throw them back to you and all of us - every one!
Happy New Year!
Happy New Year!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
-
- Platinum Member
- Posts: 3914
- Joined: Mon Aug 31, 2015 10:19 pm
- Location: Greenie and Goldie Country not to metion the WI Badgers!
Re: Happy New Year!
I will pass on a great one to you all here, but I have always hated it, drunks out and about if you go out, if you do go out everything is more $ because it is NY eve, 225 TV channels and nothing worth watching unless you are into ball drop count downs, or college bowl games, NY day is about the same. Just did taxes on it and 2 paid holidays, thats the best I can say about it. Had to start paying into Social Security again, usually had all paid in by late Oct. b4 I was self employed, when it had a max, dont know if it still does. Plus another year older and maybe not any wiser
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
Re: Happy New Year!
Happy New Year! May this be the year the America lovers take their country back from the America haters.
- rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: Happy New Year!
Hope all see a very prosperous and happy year to come. May all of our wood projects work right the first time!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin