The Continuing Adventures of A Slow Boat to Nowhere
Moderators: HopefulSSer, admin
Re: The Continuing Adventures of A Slow Boat to Nowhere
Great pics Al.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: The Continuing Adventures of A Slow Boat to Nowhere
I'm too tired to rewrite the whole thing, but you can see the latest pics and read the story of the Slow Boat's biggest adventure to date.
http://www.canoetripping.net/forums/for ... ncook-lake
http://www.canoetripping.net/forums/for ... ncook-lake
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: The Continuing Adventures of A Slow Boat to Nowhere
looks like a quiet ride . thanks for sharing .
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- rjent
- Platinum Member
- Posts: 2121
- Joined: Fri Mar 14, 2014 3:00 pm
- Location: Hot Springs, New Mexico
Re: The Continuing Adventures of A Slow Boat to Nowhere
What a feeling that must be moving across the water in something that beautiful that you made. All of the memories of the build, engineering, mistakes, successes ... must be almost magical!
Thanks for sharing these, I for one, am enjoying the trip!
Thanks for sharing these, I for one, am enjoying the trip!
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....
"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Re: The Continuing Adventures of A Slow Boat to Nowhere
Any damage to the slow boat when you hit what ever you hit?
In my youth we would use the canoe tipped on its side for shelter with a tarp on the ground and blanket to cover. LOTs of bug spray which we would wash off in the river with ivory soap(the old ones floated don't know about the new ones). Tents back in the day were expensive and heavy canvas which we couldn't afford and too heavy to portage with.
Thanks for sharing!
Ed
In my youth we would use the canoe tipped on its side for shelter with a tarp on the ground and blanket to cover. LOTs of bug spray which we would wash off in the river with ivory soap(the old ones floated don't know about the new ones). Tents back in the day were expensive and heavy canvas which we couldn't afford and too heavy to portage with.
Thanks for sharing!
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: The Continuing Adventures of A Slow Boat to Nowhere
Thanks all! It was satisfying to use all that homemade gear— not just the Slow Boat, but the reflector oven and the cooler (NYETI). As to the cooler, it was 9.5 days between coming out of the freezer and getting home. I had frozen two 5 liter water bags and I still had about a 1/4 of the ice left! Also, NYETI only took on a couple of tablespoons of water after its unscheduled dunking and river ride.
But my greatest appreciation is of the Slow Boat herself. She brought me home after a mishap. There’s a deep outside scratch on the outside of her where I think where we hit. The scratch got into the first exterior glass layer, but I don’t think it is into the second exterior glass layer and I’m virtually certain it isn’t into the wood. We kept on for another 25 miles and two days after the incident without any evident structural damage or water intrusion.
After three summers of increasingly rough usage there are many superficial scratches in her. I will be doing some sanding and revarnishing this winter and if I need to make a patch/repair to the fiberglass/epoxy, I will do it.
But my greatest appreciation is of the Slow Boat herself. She brought me home after a mishap. There’s a deep outside scratch on the outside of her where I think where we hit. The scratch got into the first exterior glass layer, but I don’t think it is into the second exterior glass layer and I’m virtually certain it isn’t into the wood. We kept on for another 25 miles and two days after the incident without any evident structural damage or water intrusion.
After three summers of increasingly rough usage there are many superficial scratches in her. I will be doing some sanding and revarnishing this winter and if I need to make a patch/repair to the fiberglass/epoxy, I will do it.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: The Continuing Adventures of A Slow Boat to Nowhere
It's canoeing season again and I'm working on some new skills, as seen in this video.
https://youtu.be/lxszJwNlLCQ
https://youtu.be/lxszJwNlLCQ
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: The Continuing Adventures of A Slow Boat to Nowhere
Nicely done!algale wrote:It's canoeing season again and I'm working on some new skills, as seen in this video.
https://youtu.be/lxszJwNlLCQ
Hope there wasn't any "B" roll of you falling in the creek...
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: The Continuing Adventures of A Slow Boat to Nowhere
So you are changing from wood working to cinematography? Lovely.algale wrote:It's canoeing season again and I'm working on some new skills, as seen in this video.
https://youtu.be/lxszJwNlLCQ
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: The Continuing Adventures of A Slow Boat to Nowhere
Nope, no swimming occurred!RFGuy wrote: Nicely done!
Hope there wasn't any "B" roll of you falling in the creek...
Ha! Nope. It sure is easier, however, than woodworking.jsburger wrote:
So you are changing from wood working to cinematography? Lovely.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!