Thanks, Skizzity and others!
I knew the plans were available somewhere on the net. I was looking for Neck Engler posts on the forum and was only thinking of going to the "Workshop Companion". You did good, Skizzity!
Although the written text is a bit rough, the diagram plans and cutting list are clear and sharp. They are listed about halfway down the Workshop companion forum discussion that's posted above.
Anybody have plans for the Mark .5 SS Toy
Moderators: HopefulSSer, admin
Re: Anybody have plans for the Mark .5 SS Toy
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
Re: Anybody have plans for the Mark .5 SS Toy
Boy, I found those pdfs hard to read!
Has anyone built this? If you have, please post photos!
I saw Dusty was working on one per the linked thread. Did you ever finish it, Dusty?
Has anyone built this? If you have, please post photos!
I saw Dusty was working on one per the linked thread. Did you ever finish it, Dusty?
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
- JPG
- Platinum Member
- Posts: 34640
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Anybody have plans for the Mark .5 SS Toy
An excellent example of search engines not getting what is needed.
Search for mark .5 and you get mark 5 with no attention paid to the ".".
I know there is at least one thread relating to building a mark .5.
Search for mark .5 and you get mark 5 with no attention paid to the ".".
I know there is at least one thread relating to building a mark .5.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Anybody have plans for the Mark .5 SS Toy
Good old google image search for "shopsmith mark .5 toy" came up with this.
http://www.shopsmith.com/ss_forum/viewt ... 138#p70138
http://www.shopsmith.com/ss_forum/viewt ... 138#p70138
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
- everettdavis
- Platinum Member
- Posts: 2162
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Anybody have plans for the Mark .5 SS Toy
There's a copy someone sent me some time ago at https://drive.google.com/drive/folders/ ... nk1ZVl5eU0
- JPG
- Platinum Member
- Posts: 34640
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Anybody have plans for the Mark .5 SS Toy
Kudos!!!everettdavis wrote:There's a copy someone sent me some time ago at https://drive.google.com/drive/folders/ ... nk1ZVl5eU0
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Anybody have plans for the Mark .5 SS Toy
https://www.workshopcompanion.com/Mini- ... h-Plan.pdf
I put this up to help you folks that are participating in Okie Jim's Build-Along. It's been reformatted so you can easily print it out on ordinary letter-size paper. -- Nick
I put this up to help you folks that are participating in Okie Jim's Build-Along. It's been reformatted so you can easily print it out on ordinary letter-size paper. -- Nick
- JPG
- Platinum Member
- Posts: 34640
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Anybody have plans for the Mark .5 SS Toy
Welcome back Nick!!!!!!! Missed Thee!!!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange