YouTube Videos featuring Shopsmiths

Moderators: HopefulSSer, admin

User avatar
RobertTaylor
Platinum Member
Posts: 559
Joined: Mon Sep 03, 2007 9:28 am
Location: North Canton, Ohio

Re: YouTube Videos featuring Shopsmiths

Post by RobertTaylor »

Chris Neilan has several project videos using his ShopSmith
https://www.youtube.com/channel/UC0cVfX ... EWWUgSyNPg
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

This video shows an older Mk V powered by a treadmill motor to achieve slow speeds for large turning.
He also has several more videos showing how he did the conversion in more detail.
[youtube]https://www.youtube.com/watch?v=Mb_OsFXf6cc[/youtube]
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
everettdavis
Platinum Member
Posts: 2162
Joined: Thu Jul 17, 2014 11:49 am
Location: Lubbock, TX

Re: YouTube Videos featuring Shopsmiths

Post by everettdavis »

I have actually done that press like you show in the first thread post before, however I used the large Turning Face-plate to attach the press block.

It worked really well on our project.

Everett
User avatar
ChrisNeilan
Platinum Member
Posts: 1461
Joined: Sun Oct 27, 2013 5:30 pm
Location: Waterford, Connecticut
Contact:

Re: YouTube Videos featuring Shopsmiths

Post by ChrisNeilan »

RobertTaylor wrote:Chris Neilan has several project videos using his ShopSmith
https://www.youtube.com/channel/UC0cVfX ... EWWUgSyNPg
And a few in the planning stages as well!
Chris Neilan

Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Part of a restoration in progress.
[youtube]https://www.youtube.com/watch?v=MSCj-VLmuYU[/youtube]
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Hobbyman2
Platinum Member
Posts: 2660
Joined: Wed Feb 01, 2017 12:52 am
Location: Ohio

Re: YouTube Videos featuring Shopsmiths

Post by Hobbyman2 »

There is a lot of videos on the shopsmith , one reason it is a good investment.



Hobbyman2
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
User avatar
rpd
Platinum Member
Posts: 3039
Joined: Tue Apr 05, 2011 3:22 am
Location: Victoria, B.C.

Re: YouTube Videos featuring Shopsmiths

Post by rpd »

Two Philip's - Two Shopsmiths. A father and son working in the shop. Shopsmith jointer gets used near the end.
[youtube]https://www.youtube.com/watch?v=s85U1cGoDxk[/youtube]
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
User avatar
everettdavis
Platinum Member
Posts: 2162
Joined: Thu Jul 17, 2014 11:49 am
Location: Lubbock, TX

Re: YouTube Videos featuring Shopsmiths -10ER Speed Control

Post by everettdavis »

10E /10ER Speed Control Running https://youtu.be/L3vhOK-FqVU

Tried this embed code but not working....
[youtube]https://youtu.be/L3vhOK-FqVU[/youtube]

Here's another that is interesting
https://youtu.be/-Zk51fhHq-0

Everett
User avatar
JPG
Platinum Member
Posts: 34610
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: YouTube Videos featuring Shopsmiths -10ER Speed Control

Post by JPG »

everettdavis wrote:10E /10ER Speed Control Running https://youtu.be/L3vhOK-FqVU

Tried this embed code but not working....
[youtube]https://youtu.be/L3vhOK-FqVU[/youtube]

Here's another that is interesting
https://youtu.be/-Zk51fhHq-0

Everett
Wonder what speed ranges are obtained with that unusual/reversed pulley arrangement? ***

Appears to be an 'early'(0-8) version.


*** the reversal comment is wrong. The use of a 5" pulley in place of the 4" pulley gives a (0-5) range of 2313 to 8500. I do not know what the extended 5to8 ratios are(assuming the earlier sliding sheave).
Last edited by JPG on Sat Feb 25, 2017 7:03 pm, edited 1 time in total.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
everettdavis
Platinum Member
Posts: 2162
Joined: Thu Jul 17, 2014 11:49 am
Location: Lubbock, TX

Re: YouTube Videos featuring Shopsmiths

Post by everettdavis »

As you watch that second video, it shows him measuring it with a tach at just over 210 RPM at the quill.

Everett
Post Reply