Cabinet job gone bad

Moderator: admin

Post Reply
masonsailor2
Platinum Member
Posts: 1564
Joined: Wed Feb 05, 2014 11:57 am
Location: Las Vegas NV

Cabinet job gone bad

Post by masonsailor2 »

I’m back in the shop full bore now that my cabinet job is over. I had said I would never do another project for someone else but this came under the category of special circumstances. My neighbors kids who are in their mid 30’s have been building a house about a 1/2 mile from here and had a tragedy. Their cabinet guy disappeared in the middle of the job after getting half down and then a second draw at about the half way point. It has turned out to be an ongoing mystery. He left all his tools ( which was quite extensive ) on the jobsite and vanished. His car is missing and the police did a welfare check on his house and no one seems to have been there for a few weeks. To add to the tragedy this was not a stranger but someone who was fairly well known with a good reputation. The general contractor for the job is my neighbor and the house is for his kids and two grandkids. It came at a critical time for them as it was the end of the construction loan and money was pretty slim and so was the timeline. They were only weeks from needing the take out loan. So with the blessing of my boss I volunteered to finish the job. It was something I have never done before, to take over where someone else left off and there were several places where it took me a while to figure out where he was going with the carcasses. He had finished about 80% of them. I think everybody who does cabinets has their own style or method and it has been interesting to finish up the job. Since I am no longer licensed and they were broke anyway I volunteered my time. They just paid for the materials. It was mostly fun because the son in law (owner) literally had issues with using a screw driver. I agreed to do it with the understanding that he would be working along side me evenings and weekends. He now has skill sets I don’t think he ever imagined he would acquire. Wherever there was something repetitive to do I demonstrated how to do it and let him run with the rest of it and he did very well. We ordered the drawers, doors and drawer fronts from Barker Doors who did a very nice job. I installed a couple of drawers with him and he did all the rest and did pretty well. The same went for drilling the doors for euro hinges and installing them. In the end the house is now completed and take out loan in place. There are several cabinets that were eliminated due to cost and now they have both decided to buy some tools to augment what the cabinet maker left behind and our plan is to teach them how to use their own tools and build the pieces that were left out. It has been many years since I taught woodworking and am thoroughly enjoying it. We are watching the local CL for a SS for them. Today a package arrived from the father ( the general contractor) which caught me completely off guard. Since I refused to take money for the job they ordered me a new PP headstock ( with a little coaching from my boss ) !
Paul
bainin
Gold Member
Posts: 298
Joined: Mon Apr 22, 2019 11:09 pm
Location: NC

Re: Cabinet job gone bad

Post by bainin »

A well deserved gift of appreciation.

Lets hope your generous nature rubs off on a few more citizens !

Sincerely hope the guy who went missing is OK..but given the details with him leaving all his equipment etc, it doesnt sound like that part of the story is going to end well.
RFGuy
Platinum Member
Posts: 1359
Joined: Mon Dec 31, 2018 8:05 am
Location: a suburb of PHX, AZ

Re: Cabinet job gone bad

Post by RFGuy »

Excellent story Paul and thanks for sharing. You are very generous to give of your time, labor and knowledge like this. Well done. Congrats on the new PP headstock!

P.S. I hope the "guy" does show up eventually. Definitely unusual for someone to skip town with all those tools left like that.
📶RF Guy

Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
User avatar
chapmanruss
Platinum Member
Posts: 1886
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Cabinet job gone bad

Post by chapmanruss »

That was a wonderful gift you gave that young family. Not only helping to finish their house in time to convert the loan but also the gift of being able to do their own projects in the future. Kudos

...
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. 10E S/N 1033 & Mark 2 to be restored.
User avatar
rjent
Platinum Member
Posts: 2112
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: Cabinet job gone bad

Post by rjent »

Well done my friend. :cool:
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
Gene Howe
Platinum Member
Posts: 3202
Joined: Wed Jul 26, 2006 7:52 pm
Location: Snowflake, AZ

Re: Cabinet job gone bad

Post by Gene Howe »

Good on ya, Paul.
User avatar
JPG
Platinum Member
Posts: 31990
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (WILDCAT territory)

Re: Cabinet job gone bad

Post by JPG »

+1 all the accolades.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply