Nick Engler's Workshop Companion
Moderators: HopefulSSer, admin
- Ed in Tampa
- Platinum Member
- Posts: 5830
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
Re: Nick Engler's Workshop Companion youtube channel & website
I am 73 I have been work working for at least 63 years I never miss an episode of Nick's Englers or Scott's growth rings.
If you miss these you are missing a wealth of information that takes years of experience to duplicate.
I followed Nick from the days of the first Hands On magazine, until today. The early Hands on magazines were handed out at Shopsmith demo's, collected a complete set that was a lot of Demo,s
If you miss these you are missing a wealth of information that takes years of experience to duplicate.
I followed Nick from the days of the first Hands On magazine, until today. The early Hands on magazines were handed out at Shopsmith demo's, collected a complete set that was a lot of Demo,s
14$ Bench plane. Is it worth it?
Nick Engler's Workshop Companion
Watch it here: https://www.youtube.com/watch?v=QSnLgE7 ... x=12&t=12s
14$ Bench plane. Is it worth it?
If you enjoy this video, check out our Workshop Companion Channel: https://www.youtube.com/channel/UCk480B ... hMfkBjhDpQ
And if you want clear, concise information on any woodworking topic, visit our Workshop Companion web site: http://workshopcompanion.com/
Last edited by Chad on Fri Jul 23, 2021 1:11 pm, edited 1 time in total.
- thedovetailjoint
- Gold Member
- Posts: 237
- Joined: Tue Dec 23, 2008 6:01 pm
- Location: High Point, NC
- Contact:
Re: Nick Engler's Workshop Companion youtube channel & website
Thanks for the support, Ed. ScottEd in Tampa wrote: ↑Tue Dec 08, 2020 10:57 am I am 73 I have been work working for at least 63 years I never miss an episode of Nick's Englers or Scott's growth rings.
Scrapwood Reindeer / Bandsaw Project
Nick Engler's Workshop Companion
Watch it here: https://www.youtube.com/watch?v=ho8XX4a ... T&index=13
In this time-lapse video, Nick shows how to make a deer with just a few quick cuts on a band saw. It’s a handy technique called “compound cutting” and it can be used to make all sorts of three-dimensional shapes. These particular reindeer are sized so you can cut them from scraps of 2x4s. Or, glue up blocks from different species of scrapwood. You can get the plans and full-size patterns for these reindeer from the Workshop Companion General Store at https://workshopcompanion.selz.com/it.... Pick up one of Nick’s books FREE just for visiting!
If you enjoy this video, check out our Workshop Companion Channel: https://www.youtube.com/channel/UCk480B ... hMfkBjhDpQ
And if you want clear, concise information on any woodworking topic, visit our Workshop Companion web site: http://workshopcompanion.com/
Last edited by Chad on Fri Jul 23, 2021 1:11 pm, edited 1 time in total.
Herringbone cutting board - Tips & Techniques
Nick Engler's Workshop Companion
Watch it here: https://www.youtube.com/watch?v=Q3fAcpp ... T&index=14
If you’ve seen our time-lapse video on making herringbone cutting boards and you’d like to make your own, then this video is for you. Nick explains his technique in detail, including the simple math you need to design your own cutting boards. He shows five different herringbone patterns as examples, and then walks you through each step as he builds one of them. This tutorial takes some time, but there are plenty of tips and useful jigs to see along the way.
And if you’d like a project plan for these boards, including the patterns and formulas that Nick uses,
visit the Workshop Companion General Store at: https://workshopcompanion.selz.com/item ... ting-board
If you enjoy this video, check out our Workshop Companion Channel: https://www.youtube.com/channel/UCk480B ... hMfkBjhDpQ
And if you want clear, concise information on any woodworking topic, visit our Workshop Companion web site: http://workshopcompanion.com/
Last edited by Chad on Fri Jul 23, 2021 1:11 pm, edited 1 time in total.
Scrapwood Soap Saver
Nick Engler's Workshop Companion
Watch it here: https://www.youtube.com/watch?v=VHArSzY ... x=15&t=40s
Tired of watching you expensive designer soap dissolve into a pile goo and disappear down the drain?
Nick shows how to make an ingenious “soap saver” from scraps of wood.
This attractive accessory drains your soap after each use, helping it to live a long, productive, clean life.
Detailed plans for the jig you need to create this soap saver are available from the
Workshop Companion General Store at: https://workshopcompanion.selz.com/item ... soap-saver
If you enjoy this video, check out our Workshop Companion Channel: https://www.youtube.com/channel/UCk480B ... hMfkBjhDpQ
And if you want clear, concise information on any woodworking topic, visit our Workshop Companion web site: http://workshopcompanion.com/
Last edited by Chad on Fri Jul 23, 2021 1:11 pm, edited 1 time in total.
Building an Impossible Puzzle Box
Nick Engler's Workshop Companion
Watch it here: https://www.youtube.com/watch?v=O6Trbjs ... x=17&t=31s
The reason this small box is (almost) impossible to open is that it doesn’t open like a box.
There are no hinges, no lids, no latches – nothing you’d expect.
You have to hold the box in your hands just right and…well, you have to watch the video to see how the box opens.
Nick will also show you how it’s made.
And if you’d like to make your own Impossible Puzzle Box, you can find the plans at the
Workshop Companion General Store: https://workshopcompanion.selz.com/item ... puzzle-box
If you enjoy this video, check out our Workshop Companion Channel: https://www.youtube.com/channel/UCk480B ... hMfkBjhDpQ
And if you want clear, concise information on any woodworking topic, visit our Workshop Companion web site: http://workshopcompanion.com
Last edited by Chad on Fri Jul 23, 2021 1:11 pm, edited 1 time in total.
Scrapwood Soap Saver - Tips & Techniques
Nick Engler's Workshop Companion
Watch it here: https://www.youtube.com/watch?v=kO0nos3 ... T&index=17
Have you seen our time-lapse video in which Nick churns out soap savers at super speed?
Well, here it is again at a regular pace, allowing Nick to explain each step in detail for those of you who would like to make your own.
Specifically, he spends a good deal of time explaining the “notch jig” he invented and how to use it to create the delicate lattice that enables the soap savers to save soap.
For those of you who would like the plans for this jig, it’s available from the
Workshop Companion General Store: https://workshopcompanion.selz.com/item ... soap-saver
Pick up one of Nick's books FREE just for visiting: https://workshopcompanion.selz.com/categories/books
If you enjoy this video, check out our Workshop Companion Channel: https://www.youtube.com/channel/UCk480B ... hMfkBjhDpQ
And if you want clear, concise information on any woodworking topic, visit our Workshop Companion web site: http://workshopcompanion.com
Last edited by Chad on Fri Jul 23, 2021 1:12 pm, edited 1 time in total.
- thedovetailjoint
- Gold Member
- Posts: 237
- Joined: Tue Dec 23, 2008 6:01 pm
- Location: High Point, NC
- Contact:
Re: Nick Engler's Workshop Companion youtube channel & website
I have to admit that while I was impressed with Nick's approach to this project, I don't see the value of the product itself. My adult kids have made it clear to me that they and their generation think that bars of soap are disgusting and are just another antiquated thing that us old people use and do, like wearing wrist watches, having landlines and taking pictures of people other than ourselves and our food!
Re: Nick Engler's Workshop Companion youtube channel & website
Yeah, I can see your point. I enjoyed Nick's video, but I also wondered while watching it whether it would be as applicable today or not. I prefer bar soap myself, but I am sure I am in the minority. Antibacterial soaps aren't healthy and I am allergic to most liquid soaps, but those seem to be popular.thedovetailjoint wrote: ↑Fri Jan 15, 2021 1:53 pm I have to admit that while I was impressed with Nick's approach to this project, I don't see the value of the product itself. My adult kids have made it clear to me that they and their generation think that bars of soap are disgusting and are just another antiquated thing that us old people use and do, like wearing wrist watches, having landlines and taking pictures of people other than ourselves and our food!
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor