My Growth Rings with Scott Markwood

Moderator: admin

User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

Re: Scott's My Growth Rings youtube channel & website

Post by Chad »

Chad
  • ---------------------------------------------------------------------
    1963 Shopsmith Mark V "Goldie" 1-1/8 hp Serial # 379185
    ---------------------------------------------------------------------
    1994 OKUMA LB15 II OSP7000
    2017 OKUMA LB3000 EXII SPACE TURN MY OSP P300
User avatar
thedovetailjoint
Gold Member
Posts: 112
Joined: Tue Dec 23, 2008 6:01 pm
Location: High Point, NC
Contact:

Re: Scott's My Growth Rings youtube channel & website

Post by thedovetailjoint »

bainin wrote: Thu Apr 29, 2021 12:15 pm On my fence, both the bracket and black hex nut are missing and there is only a hole which may be indicating that I might be missing some pieces :)
Were there different versions of the bandsaw fence ?
Why are you not using the bracket as shown in the image?

bsfence.JPG

b
I posted something about this on my blog some time back: http://shopsmith-tool-hunter.blogspot.c ... sions.html
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

Introduction of the Shopsmith 6" Belt Sander SPT (Special Purpose Tool)

Post by Chad »

85.jpg
85.jpg (23.48 KiB) Viewed 2348 times

Watch it here: https://youtu.be/Tkd4tXRlGPs

The 6" Shopsmith Belt Saner has got to be the most requested Shopsmith SPT (Special Purpose Tool) that I've been asked to demo, and to be honest with you it deserved better than this rushed video. I promise that once we get settled in a new place that I'll reshoot this entire video.

Here's Nick Englers Belt Sander tune-up Sawdust Session: https://youtu.be/91bRVOMEDFg​
Here's the Sawdust Session with the Miter Gauge Belt Sander jig: https://youtu.be/sbdM-bs8j-g
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

STUMPED? Q&A to Introduction of the Shopsmith 6" Belt Sander SPT (Special Purpose Tool)

Post by Chad »

86.jpg
86.jpg (25.6 KiB) Viewed 2292 times

Watch it here: https://youtu.be/xqhTFOA2HI4

This episode of STUMPED Q&A is a follow-up to the video Introduction of the Shopsmith 6" Belt Sander video and we not only answer the Questions, Comments, and Cheap-Shots from the video, but I share a few more tips that I should have done in the last video! Here's that video, in case you missed it: https://youtu.be/Tkd4tXRlGPs
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

A 5000 Sub Celebration and Exploring Shopsmith Patents

Post by Chad »

87.jpg
87.jpg (24.69 KiB) Viewed 2046 times

My Growth Rings

Watch it here: https://youtu.be/hypHFbwDvMs

The bulk of this video is about exploring US patents, but DANG, 5000 subs! Just the other day I was reminded of the excellent celebration that took place back in 2015 when this channel hit 500 subs (Seen here: https://youtu.be/cyKKosa0vmA​) As much fun as that was I've decided that the 5000 of you deserve better, so we are going to conduct a drawing for a few on my favorite things later this week in our mid-week follow-up to this odd video.
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

STUMPED Q&A and 5000 Sub Drawing Delay

Post by Chad »

88.jpg
88.jpg (15.12 KiB) Viewed 1820 times

My Growth Rings

Watch it here: https://youtu.be/JrtiQOU2LE8

Due to my out-of-state travels this week there has been a delay in the recording and posting of this week's STUMPED Q&A follow-up video as well as the 5000 subscriber giveaway that I announced on Monday. If you missed that video, catch it here: https://youtu.be/hypHFbwDvMs
Be sure to leave a comment to be entered in the giveaway.
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

A Few Of My Favorite Things: Google Patents Q&A and 5000 Sub Giveaway

Post by Chad »

89.jpg
89.jpg (24.07 KiB) Viewed 1796 times

My Growth Rings

Watch it here: https://youtu.be/YlfPuM5ffH8

5000 subs! Now that's something to celebrate! In this video, we'll first cover the questions from the last video, which was on using Google to perform searches of US Patents, which as the patents for Shopsmith tools, and then we'll conduct a drawing for a few of my favorite shop tools and products that make my time in the shop easier and more enjoyable. Don't forget, if you are selected as a winner, email me with your name and shipping address to ScottMarkwood(at)Gmail.com

Thank you ALL for your support!
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

Introduction of the Shopsmith 20" Scroll Saw SPT (Special Purpose Tool)

Post by Chad »

90.jpg
90.jpg (24.59 KiB) Viewed 1615 times

My Growth Rings

Watch it here: https://youtu.be/7udRF1vHyC0

The Shopsmith Scroll Saw is another of the most requested Shopsmith SPT (Special Purpose Tool) that I've been asked to demo, and just like the 6" belt sander, I promise to shoot this video again once we get the shop relocated.

🎬 Here's a great video by Doug Reid putting the Shopsmith Scroll Saw through its paces: https://youtu.be/omnamrobYxg
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

STUMPED? Q&A's from "Intro to the Shopsmith 20" Scroll Saw"

Post by Chad »

91.jpg
91.jpg (24.58 KiB) Viewed 1444 times

My Growth Rings

Watch it here: https://youtu.be/0yEPPbu3JEo

THIS VIDEO IS NOT ABOUT CLAMPS!!! In this week's STUMPED? Q&A we answer the Questions, Comments, and Cheapshots from the "Introduction of the Shopsmith 20" Scroll Saw SPT" video. If you missed it, find it here: https://youtu.be/7udRF1vHyC0

🎬 Here's a GREAT video by Doug Reid putting the Shopsmith Scroll Saw through its paces: https://youtu.be/omnamrobYxg
User avatar
Chad
Gold Member
Posts: 267
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

What's Your "White Whale"? Is the Excalibur Ultra the BEST ADJUSTABLE DADO EVER???

Post by Chad »

92.jpg
92.jpg (25.01 KiB) Viewed 1224 times

My Growth Rings

Watch it here: https://youtu.be/UHKbuu4rtjM

I have been waiting over 20 years to get my hands on an Excalibur Ultra dado blade, and now I'm admittedly totally confused by it! We'll put this to the test in the mid-week follow-up.
Post Reply