My Growth Rings with Scott Markwood

Moderators: HopefulSSer, admin

User avatar
Chad
Platinum Member
Posts: 595
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

Installing 2 Brands of Urethane Bandsaw Tires on a Shopsmith Bandsaw

Post by Chad »

62.jpg
62.jpg (7.78 KiB) Viewed 1501 times

Watch it here: https://www.youtube.com/watch?v=MIcnerD ... B&index=62

I finally got around to installing new urethane tires on a couple of my Shopsmith bandsaw, but just to make it fun I decided to test two brands: The Blue Max and Polytech. I'll be the first to admit that this was a totally different experience from installing stock rubber tires and I look forward to responding to your Questions, Comments & Cheapshots in the mid-week follow-up, so be sure to type something in the video comment section.

Here's the video where I removed the upper wheel on the Shopsmith bandsaw: https://youtu.be/H1YPHGeYYC8​
Here's the video where I removed the lower wheel from the Shopsmith bandsaw: https://youtu.be/XJ4Tzn0RsD4​

Visit http://www.MyGrowthRings.com​
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...​
and http://shopsmith-tool-hunter.blogspot...​

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
User avatar
Chad
Platinum Member
Posts: 595
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

Stumped? Q&A: Shopsmith Bandsaw Urethane Tire Replacement, Solvent for Removing Adhesive Residue?

Post by Chad »

63.jpg
63.jpg (8.67 KiB) Viewed 1454 times

Watch it here: https://www.youtube.com/watch?v=d0oY4vj ... B&index=63

Let's tackle the Questions, Comments & Cheap-Shots from this past weekend's video on installing new urethane tires on a couple of my Shopsmith bandsaw. Just to make it fun I decided to test two brands: The Blue Max and Polytech. If you missed that episode you can catch it here: https://youtu.be/MIcnerDwTcg​

Here's Robert's blog, where he shared pics of his tire installation process: https://odinstoyfactory.robertkeeney....​

Here's the video of the "Worlds Easiest Method for Installing Urethane Bandsaw Tires":
https://youtu.be/3uP_VtV1SbY​

Here's Nick Engler's new "Workshop Companion" channel: https://www.youtube.com/channel/UCk48...​
🟢 Order Nicks books or even the entire "Workshop Companion" series on CD here: https://amzn.to/3uaRNMI​


Visit http://www.MyGrowthRings.com​
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...​
and http://shopsmith-tool-hunter.blogspot...​

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!
#MyGrowthRings​ #StumpedQ​&A #UrethaneBandsawTireReplacement
User avatar
thedovetailjoint
Gold Member
Posts: 236
Joined: Tue Dec 23, 2008 6:01 pm
Location: High Point, NC
Contact:

Re: Scott's My Growth Rings youtube channel & website

Post by thedovetailjoint »

Hats off to @rdhelm who asked the simple question “When you used a brass wire wheel, was it really brass coated steel?” He went on to say that brass-plated steel wheels were all that he was able to find. Well, nowhere on the package does it say, but a quick magnet check proves that yes, it is most definitely a ferrous metal! I feel ripped off, but it did do the job just fine without damage to my bandsaw wheel.

Not so brass wire wheel
Not so brass wire wheel
Not so brass wire brush.jpg (235.33 KiB) Viewed 1441 times
User avatar
Chad
Platinum Member
Posts: 595
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

Installing Carter "Upgrade" Blade Guides on a Shopsmith Bandsaw. Are They Worth it?

Post by Chad »

64.jpg
64.jpg (8.2 KiB) Viewed 1385 times

Watch it here: https://www.youtube.com/watch?v=P-Uzrpp ... B&index=64

In this video we will install a set of Carter Products ball bearing blade guides on a Shopsmith bandsaw. According to their website "The Carter Shopsmith conversion kit updates your saws performance through the use of all sealed ball bearing roller guides. This provides your saw with reduced blade friction and improved cutting accuracy. The kit contains both upper and lower roller bearing side support assemblies, which work in conjunction with the existing Shopsmith thrust bearing." Really? Well, we'll be the judge of that, won't we?

Be sure to be a part of the follow-up mid-week video by posting a related Question, Comment, or Cheap-Shot in the comment field below the video.

This set was loaned to me for testing by Carter Products. This is just one of several upgrades that Carter Products has for your Shopsmith bandsaw and are available directly from them on their site: https://tinyurl.com/CarterProductsSS​ (This is NOT an affiliate link)

Here are links to a few of the products I used in the video:
🟢 Boeshield T-9 lubricant spray: https://amzn.to/37AYs9v​
🟢 My favorite 9" long T-handle "Shopsmith Toolbox" 5/32" Hex Wrench: https://amzn.to/3sm3NcJ​
🟢 The best American-made rawhide mallet for Shopsmith owners: https://amzn.to/3ukjeUu​

Links to the videos mentioned in this video:
How to tune your Shospmith bandsaw:https://youtu.be/zCBlSe4Z450​
Here's the video where we removed the Shopsmith bandsaw table and so much more: https://youtu.be/FyMKTS8yM5c​

Visit http://www.MyGrowthRings.com​
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...​
and http://shopsmith-tool-hunter.blogspot...​

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#CarterProducts​ #ShopsmithBandsawUpgrade​ #ShopsmithBandsawGuides
edma194
Platinum Member
Posts: 1875
Joined: Fri Jun 19, 2020 4:08 pm

Re: Scott's My Growth Rings youtube channel & website

Post by edma194 »

Just watched the Carter guide video, thanks for that. I have a set on order, and some blocks of wood already cut out for bandsaw boxes. Looks like installation will not be difficult.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
User avatar
thedovetailjoint
Gold Member
Posts: 236
Joined: Tue Dec 23, 2008 6:01 pm
Location: High Point, NC
Contact:

Re: Scott's My Growth Rings youtube channel & website

Post by thedovetailjoint »

It really was easy, once I got the part rotated on the post. I was surprised that it continued to move though, so definitely consider using Loctite or something on that connection. Scott
User avatar
thedovetailjoint
Gold Member
Posts: 236
Joined: Tue Dec 23, 2008 6:01 pm
Location: High Point, NC
Contact:

Re: Scott's My Growth Rings youtube channel & website

Post by thedovetailjoint »

Here's a screenshot of the Carter ball bearing blade guides installed on the Shopsmith bandsaw. Looking forward to doing some cutting this week once I get the table shimmed.
Carter Products Shopsmith bandsaw ball bearing blade guides
Carter Products Shopsmith bandsaw ball bearing blade guides
Carter Products Shopsmith bandsaw ball bearing blade guides MyGrowthRIngs.JPG (59.07 KiB) Viewed 1345 times
User avatar
Ed in Tampa
Platinum Member
Posts: 5826
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Re: Scott's My Growth Rings youtube channel & website

Post by Ed in Tampa »

Good show! Enjoyed the Carter upgrades! Also I found it interesting that many wire wheels sold as brass aren't. Thanks Scott!
User avatar
Chad
Platinum Member
Posts: 595
Joined: Wed Jul 25, 2018 4:07 pm
Location: West Milton, Ohio

STUMPED? Q&A: Using Carter Blade Guides on a Shopsmith Bandsaw

Post by Chad »

65.jpg
65.jpg (7.5 KiB) Viewed 1277 times

Watch it here: https://www.youtube.com/watch?v=Sf2jP2O ... =65&t=395s

In this video, we follow-up on the install a set of Carter Products ball-bearing blade guides on a Shopsmith bandsaw and answer your Questions, Comments & Cheap-Shots. If you missed that video, be sure to catch it here: https://youtu.be/P-Uzrpp-nEQ​

This set was loaned to me for testing by Carter Products. This is just one of several upgrades that Carter Products has for your Shopsmith bandsaw and are available directly from them on their site: https://tinyurl.com/CarterProductsSS​ (This is NOT an affiliate link)

Visit http://www.MyGrowthRings.com​
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com/shopsmith-...​
and http://shopsmith-tool-hunter.blogspot...​

A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#CarterProducts​ #ShopsmithBandsawUpgrade​ #ShopsmithBandsawGuides
User avatar
thedovetailjoint
Gold Member
Posts: 236
Joined: Tue Dec 23, 2008 6:01 pm
Location: High Point, NC
Contact:

Re: Scott's My Growth Rings youtube channel & website

Post by thedovetailjoint »

IMPORANT NOTE: I believe that the excessive blade drift encountered in this video may have been a result of the “Stupid Bandsaw Trick” shown several videos back, where the blade on the Shopsmith bandsaw can be twisted. The amount of drift I encountered was unusual, and I’ve ordered a new blade and will test this phenomenon shortly. Scott (AKA: MyGrowthRings)

Image
Post Reply