I am waiting for my used DC3300 to be delivered by my lovely granddaughter but wondered if anyone would be so kind as to list the inside and outside diameters of the hose ends. There are a couple of attachments that I want to get ordered and one is a 4" to 2 1/2" adapter.
Thanks, Phil
need inside and outside diameter for DC3300 hose
Moderators: HopefulSSer, admin
Re: need inside and outside diameter for DC3300 hose
ID, I'm getting 2.07". OD is slightly tapered, and mine is also a bit warn, I get 2.312" at the base to 2.275" near the end.
- David
- David
- JPG
- Platinum Member
- Posts: 34640
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: need inside and outside diameter for DC3300 hose
What is commonly referred to as 2 1/2 has fittings close to 2 1/4.
As David mentioned above the hose ends are tapered.
On a fitting(rt angle) it measured at 2 1/4 od and 2 5/16 id.
As David mentioned above the hose ends are tapered.
On a fitting(rt angle) it measured at 2 1/4 od and 2 5/16 id.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: need inside and outside diameter for DC3300 hose
Thanks, just what I needed to know.