Selling a Shopsmith
Moderators: HopefulSSer, admin
-
- Silver Member
- Posts: 10
- Joined: Tue Jun 19, 2007 10:44 pm
- Location: Round Rock, Tx
- Contact:
Selling a Shopsmith
I am getting old enough to start downsizing. How is the best way to begin selling off my Shopsmith and associated attachments? I have an older Model 500. Would Craigslist, or other social media work best. Or local newspaper? Please advise
Re: Selling a Shopsmith
Craigslist works well around here. There's also a Facebook group but I don't Facebook.
Hard to say what works best, I think look for other ads in your area. Prices around here are pretty low for older 500s. Greenies can be had for as low as $200 so any accessories you have would increase your value. When I see ads on Craigslist I ask for the serial number to see how old it is. Sometimes that's mentioned in the ad, but usually not, and I don't know if it's a good idea to put it there because I'll use it to bargain down the price. Then again some people want to hear that their machine will be taken care of by some who knows what they are doing and I think I'm a reasonable facsimile of someone who knows what they are doing.
Good luck with this.
Hard to say what works best, I think look for other ads in your area. Prices around here are pretty low for older 500s. Greenies can be had for as low as $200 so any accessories you have would increase your value. When I see ads on Craigslist I ask for the serial number to see how old it is. Sometimes that's mentioned in the ad, but usually not, and I don't know if it's a good idea to put it there because I'll use it to bargain down the price. Then again some people want to hear that their machine will be taken care of by some who knows what they are doing and I think I'm a reasonable facsimile of someone who knows what they are doing.
Good luck with this.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Selling a Shopsmith
I agree with what Ed has already told you which I find true here on the west coast too. I believe many buyers are looking to be first time Shopsmith owners. Go through your Mark V and accessories to make them ready to use for the new buyer. Get them cleaned up and lubricated. Showing them as a ready to work tool for a first time Shopsmith buyer can be a selling point. If you have SPT's to sell also consider advertising them separately. Someone looking to buy a Mark V may not be ready to get a whole shop full of tools at once. Selling a Bandsaw or Jointer, for example, separately gives flexibility for both you and buyers. There is a person near me that regularly sells a Mark V with several SPT's. Currently he has a Mark V 520 with all the original accessories that it came with from the factory plus a Bandsaw on it's own power stand, a Jig Saw, a Jointer, a Belt Sander and Dust Collector for $3750. That is a lot for most buyers to lay out all at once for used tools. Another advantage to selling any SPT's separate from the Mark V is you may be able to sell the individual items for more than if sold as a package. Buyers will be looking for a bargain but will value getting a good working tool with all the needed parts to use it.
All but 1 of the Shopsmith's I have purchased to restore I have found on craigslist. All I have resold have been advertised there too. The closest one I have sold to yours was a 1982 Mark V with the original table system (later known as a Mark V 500). I purchased it and completely went through it, replaced the damaged main table and missing parts. I had no problem selling it for what I believe was a fair price.
All but 1 of the Shopsmith's I have purchased to restore I have found on craigslist. All I have resold have been advertised there too. The closest one I have sold to yours was a 1982 Mark V with the original table system (later known as a Mark V 500). I purchased it and completely went through it, replaced the damaged main table and missing parts. I had no problem selling it for what I believe was a fair price.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Selling a Shopsmith
And Russ, he's still out there, Ive been seeing his ad even now..
Jeff
Bothell, WA
Jeff
Bothell, WA
Jeff Wagener
Jdwags
Rathdrum, Idaho
Mark VII 2021 with Band Saw
Mark V 1986
Belt Sander, Jointer, Band Saw
Jdwags
Rathdrum, Idaho
Mark VII 2021 with Band Saw
Mark V 1986
Belt Sander, Jointer, Band Saw
Re: Selling a Shopsmith
Get some Barkeepers Friend. I use it with a light oil base to make a paste and remove rust. Rub it on with your fingers (latex gloved) and wipe off with a cloth. I've found that to be the easiest and fastest method. Everything Russ wrote is spot on. Make sure your listing on CL is in Austin, Waco and San Antonio. That will hit the surrounding areas. Good luck.
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Selling a Shopsmith
Jeff,
The ad I mentioned above was a different set of Shopsmith tools he was selling but currently he has another ad with a a Mark V 520 and a group of SPT's for sale. He has been doing these "sales" from Vancouver WA off and on for a long time.
The ad I mentioned above was a different set of Shopsmith tools he was selling but currently he has another ad with a a Mark V 520 and a group of SPT's for sale. He has been doing these "sales" from Vancouver WA off and on for a long time.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Selling a Shopsmith
I just ran across an ad for a "complete Shopsmith shop" for $5,000. I didn't take the time to figure it all out, but I assume it was a reasonable price for the complete set. I just can't see many newbies taking that kind of a leap. I contacted the guy and offered to buy his DC-3300. Nope. All or nothing. I might be wrong, but I would not take that approach. I would offer bundle pricing if someone wanted several tools, but wouldn't demand they take the whole shop or nothing.
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Selling a Shopsmith
That attitude is a good way to assure "nothing' will happen.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange