What is this? I purchased a used Shopsmith a while back and this was among the "extras."
Identify part
Moderators: HopefulSSer, admin
-
- Bronze Member
- Posts: 2
- Joined: Sat Apr 10, 2021 2:22 pm
Identify part
- Attachments
-
- IMG_3796.JPG (134.49 KiB) Viewed 1225 times
-
- IMG_3797.JPG (116.51 KiB) Viewed 1225 times
-
- IMG_3796.JPG (134.49 KiB) Viewed 1225 times
-
- IMG_3797.JPG (116.51 KiB) Viewed 1225 times
Re: Identify part
It is a saw blade arbor for saw blades with a 5/8" arbor hole.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- chapmanruss
- Platinum Member
- Posts: 3481
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Identify part
John is probably correct but since I cannot see the top of the Arbor without the nut I am not sure which one of the two shown below you have. The one on the left is P/N 555608 and is the 5/8" Saw Blade Arbor originally for the Sawsmith Table Saw but now for the Mark V 505, 510, 520 and Mark 7. It is the more commonly found Arbor of the two. The one on the right is P/N 555572 and is the 1-1/4" Saw Blade Arbor for the Sawsmith Table Saw.
_
_
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
- Bronze Member
- Posts: 2
- Joined: Sat Apr 10, 2021 2:22 pm
Re: Identify part
Thank you!
It is a 555608 - and when I saw the answers I smacked my forehead and said "I should have seen that" to myself...!
Thanks again!
Tom
It is a 555608 - and when I saw the answers I smacked my forehead and said "I should have seen that" to myself...!
Thanks again!
Tom