Klein Tools Digital Angle Gauge and Level
Moderators: HopefulSSer, admin
- dusty
- Platinum Member
- Posts: 21371
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Klein Tools Digital Angle Gauge and Level
The latest and greatest Klein version would be most useful (to me) when measuring where rise and run (cutting stair risers or rafters) is involved.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Re: Klein Tools Digital Angle Gauge and Level
I think they are just on the bottom, so it might not be ideal for woodworking. It may not attach well to the side of TS blade, for example.
- David
Re: Klein Tools Digital Angle Gauge and Level
I didn't realize this until I checked the specification sheets but it looks like the Klein 935DAG is more accurate than my Wixey Digital Angle Gauge. The Klein is accurate to 0.1°over the following ranges: 0° to 1°, 89° to 91°, 179° to 180°. For all other angles it is accurate to 0.2°.
By comparison, the Wixey is rated at 0.2° over the entire range of angles.
By comparison, the Wixey is rated at 0.2° over the entire range of angles.
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
- edflorence
- Platinum Member
- Posts: 622
- Joined: Thu Jul 20, 2006 8:14 pm
- Location: Idaho Panhandle
Re: Klein Tools Digital Angle Gauge and Level
Ed
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser
Idaho Panhandle
Mark 5 of various vintages, Mini with reversing motor, bs, dc3300, jointer, increaser, decreaser