Well I did it!!! I obligated...
Moderators: HopefulSSer, admin
-
- Gold Member
- Posts: 410
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: Well I did it!!! I obligated...
Congrats!
Greenie SN 362819 (upgraded to 510), Bandsaw 106878, Jointer SS16466
Re: Well I did it!!! I obligated...
Nice- Wife isn't going to make you wait for Christmas?
Re: Well I did it!!! I obligated...
Nope. In fact she was like open it open it. I shall hopefully begin set up this weekend. I do have a few honey do's to knock of the list first but it shouldn't take all weekend. Plus I have to get that 1995 put back together and working.
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
Re: Well I did it!!! I obligated...
Congratulations, I think you will really like this machine. When you reach this point in the unpacking, can I request a photo of the inside of the Base Arm where you unlock it go to Drill Press or Under Table modes? I'm trying to determine which Double Tilt type is the latest, pretty sure that is what you have. The one I think it is will have a couple of screws off to the sides of the release/engage knob.
We'll all understand if that '95 model gets de-prioritized for a while. I'm usually a two-Mark shop, but for a long while after I got a PowerPro it was all I used.
- David
We'll all understand if that '95 model gets de-prioritized for a while. I'm usually a two-Mark shop, but for a long while after I got a PowerPro it was all I used.
- David
Re: Well I did it!!! I obligated...
You got it David. I'm hoping to get to it this weekend.
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
Re: Well I did it!!! I obligated...
Congratulations!!! How exciting. Have fun.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Well I did it!!! I obligated...
So I had a fall the other day and fractured my pelvis. So I'm laid up and my SS Mark 7 is sitting out in the garage killing me softly... This morning my son says "dad lets get out in the garage and get that SS put together. I'll do all the work and you just guide me through the steps." So I sat on a stool and and read the instructions and only helped flip it over to get the legs on and put on the casters. We had the pot heater on and got the garage warm enough that the PowerPro worked... Wow... it is soooooo incredibly quiet. The sounds it makes getting up to speed is almost addicting. Here some pix for you guys. Enjoy
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
Re: Well I did it!!! I obligated...
Here's some more.
All tucked in for the winter.
All tucked in for the winter.
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
Re: Well I did it!!! I obligated...
David do any of these pix help? or are you needing me to set it up in drill mode to see inside?
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
Re: Well I did it!!! I obligated...
Yes, thank you. Not what I expected, but it answered my question. Your DT bases are different than mine, which are less than two years old and which I already knew were different than original. You also answered another question I had, which is how similar the factory motor cover is to the DIY. I like the factory location for the power cord better than the DIY location, and I'm wondering why we did it that way. Looks like you installed the caster sets twice. Glad you found a helper to get it together. Your machine looks great!
- David