SS 520 with BS for $400 ?

Moderator: admin

Post Reply
User avatar
fredsheldon
Platinum Member
Posts: 1175
Joined: Tue Jan 17, 2012 1:31 pm
Location: The Woodlands, Texas

SS 520 with BS for $400 ?

Post by fredsheldon »

Sounds like a nice deal. Wished my budget isn't already busted this month on my PowerPro order. :(

http://hickory.craigslist.org/tls/3068258911.html
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

Where are you seeing proof that is a 510 or 520. I don't believe it is. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
SDSSmith
Platinum Member
Posts: 1940
Joined: Mon Dec 04, 2006 6:35 pm
Location: San Diego, CA

Post by SDSSmith »

fredsheldon wrote:Sounds like a nice deal. Wished my budget isn't already busted this month on my PowerPro order. :(

http://hickory.craigslist.org/tls/3068258911.html
Looks like a 500 to me. Has both narrow and wide extension tables. Has some nice 'goodies' with it.
Rob in San Diego
Email: SDSSmith51 AT gmail.com
User avatar
letterk
Gold Member
Posts: 437
Joined: Wed Mar 14, 2012 4:28 pm
Location: Minneapolis\St. Paul, MN

Post by letterk »

Yeah it looks like a 500 to me. The smaller side table along with crank handle to lift the table and no extension tables/legs would say 500 to me.
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Post by algale »

The title of the Craigslist ad in the link has been changed to indicate it is a 510, but I agree with the previous posts that it is a 500.
User avatar
fredsheldon
Platinum Member
Posts: 1175
Joined: Tue Jan 17, 2012 1:31 pm
Location: The Woodlands, Texas

Post by fredsheldon »

Well that just goes to show you can't believe everything you read :D

Since I'm new to Shopsmith I really don't have the keen eyes you experts have. Thanks for saving me a wasted trip.

What is the saying, if it sounds too good to be true, then ......

Update: just got a response from the seller:

"It is actually a 510 model and as of right now its available. We have a few people interested in it. We are in North Carolina." ( so he says).
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
damagi
Platinum Member
Posts: 927
Joined: Wed Jan 06, 2010 6:06 pm
Location: near Seattle, WA

Post by damagi »

fredsheldon wrote:Well that just goes to show you can't believe everything you read :D

Since I'm new to Shopsmith I really don't have the keen eyes you experts have. Thanks for saving me a wasted trip.

What is the saying, if it sounds too good to be true, then ......

Update: just got a response from the seller:

"It is actually a 510 model and as of right now its available. We have a few people interested in it. We are in North Carolina." ( so he says).
For $400 its a decent deal given that its a 500 with the extra wide extension table, bandsaw, and sander...plus the other small stuff like the mortising stuff (assuming its all there). Definitely not a 510 or 520 given the table configuration.
Mark 7, Pro Planer, Jointer, Bandsaw w/Kreg, Biscuit Joiner, Belt Sander, Jig Saw, Ringmaster, DC3300, Overarm Pin Router, Incra Ultimate setup

JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw

-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
User avatar
letterk
Gold Member
Posts: 437
Joined: Wed Mar 14, 2012 4:28 pm
Location: Minneapolis\St. Paul, MN

Post by letterk »

fredsheldon wrote:Well that just goes to show you can't believe everything you read :D

Since I'm new to Shopsmith I really don't have the keen eyes you experts have. Thanks for saving me a wasted trip.
Lot of Craigslisters don't exactly know what they have and list things better than they actually are. Pictures are often from the back of the machine too. They also seem to always say they bought it 10 years ago, which is always 20-25 years based on the date code.

The dead giveaways for identifying that I used.

500 - Small main table, t handle for table adjustment
510 - larger main table, round handle for table adjustment, round tube on table for fence
520 - larger main table, round handle for table adjustment, wide front edge for fence and I think they all are type C headstocks with the safety key unless they were upgraded older models.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

letterk wrote:Lot of Craigslisters don't exactly know what they have and list things better than they actually are. Pictures are often from the back of the machine too. They also seem to always say they bought it 10 years ago, which is always 20-25 years based on the date code.

The dead giveaways for identifying that I used.

500 - Small main table, t handle for table adjustment
510 - larger main table, round handle for table adjustment, round tube on table for fence
520 - larger main table, round handle for table adjustment, wide front edge for fence and I think they all are type C headstocks with the safety key unless they were upgraded older models.
The tables alone tell the 'tale'(not surprising since that be the model differences). A less obvious one is a 505.

None of that is a reliable 'age' determinant as already pointed out(upgrades).
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply