Moderator: admin
This is one of the reasons I don't do a lot of scroll saw work.tgamel wrote:I thought I heard that SS was not making the scroll saw anymore, so I purchased a Porter Cable 16" last week. I must say I really, really need to practice my cuts. I kind of felt like a third grader that cannot color inside the lines.
Todd
I never could/did color in the lines.Yea a good mentor or hands on training cannot be beat. You can only learn so much from on-line videos and reading books. Anyway, if nothing else, it gives me more reasons to make sawdust...As if I ever needed another reason.Lodgepole wrote:I know the feeling! Fortunately, I took a class at the Boise Woodcraft store on scrollsawing Christmas Ornaments. Nothing like sitting down with someone who can teach, give some tips that I have never read and finally critique your style.
The insert for the bandsaw with the aluminum table should fit, item 516173. The blade cutout is a little different but the insert diameter and clip location is the same.mrhart wrote:Ok, with JPG's pictorial help and some fiddling, I mounted a blade and fired her up. I did have to rob the key out of my planer, one more thing to order or "backorder". I'm not sure how to adjust everything quite yet, but when I ramp up the speed, the blade seems to track all over (can see shadows going a little crazy).
I alson need a table insert. They are not orderable if I remember correctly and my cast version bandsaw is too small.
Shined up the table and waxed her up
Might be best if I wait for the owners manual so I don't screw anything up.
Shopping list-
Red Key (SS orderable)
Discontinued Insert
Discontinued part #86 (must manufacture but I did get the screw from SS)
Discontinued front cast trunion
If anyone who reads this post has any of the discontinued parts above and wants to off them, please contact me.
SDSSmith wrote:The insert for the bandsaw with the aluminum table should fit, item 516173. The blade cutout is a little different but the insert diameter and clip location is the same.
Called a table upgrade!:Dmrhart wrote:Thankyou sir, I'll put it on the list. I think SS must love a guy like me, find old stuff-need a part-need another part-oh one more part...and the shipping dept must think I'm an idiot!
The older bandsaw #2 has no table insert...do they make those??
Shopsmith used to stock these (and may still). There are alternatives such as the one here for the Delta saw or here.mrhart wrote:Thankyou sir, I'll put it on the list. I think SS must love a guy like me, find old stuff-need a part-need another part-oh one more part...and the shipping dept must think I'm an idiot!
The older bandsaw #2 has no table insert...do they make those??
reible wrote:I have a older bandsaw insert on order since last April... no idea if I will ever see it but if you order it that may kick start a batch for all of us that want one. If I recall it is under $14.
Ed
I agree that this is an excessive time to wait without receiving some sort of notification about the order BUT there is nothing to refund. Shopsmith does not charge for back ordered items until they ship.mrhart wrote:So you paid for it (special order?) last April, and you still don't pocess the part?
Thats not right, after a reasonable time you should be refunded and then notified when it will be available. Or better yet, Someone should be able to give you an accurate "heads-up". Wow
