Local Clubs

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

User avatar
woodhead52
Gold Member
Posts: 86
Joined: Mon Jan 14, 2013 2:10 pm
Location: Virginia Beach, VA

Post by woodhead52 »

[quote="shortslvs"]You may be right about the bragging, I was just sooo excited ]

Hahaha, I wish lived nearby so I could come over and help you. I have a truck and would be glad to haul some of that darn junk away. Right over to my garage. Hahaha

I have similar worries, about myself. The line between passion and obsession is pretty darn thin.

I'm like you, in that I like the social possibilities of owning a SS. I hope you either find or are able to get a local club started. I'm really looking forward to meeting the group in my area.

My wife and I purchased an older Airstream trailer last July and we love it. Until we were looking to buy one we had no idea how many AS owners there are out there. Turns out that owning an AS is like joining a social club. If you want that aspect, that is. We had to drive from our home in Virginia to Ohio to pick up the AS. Our first first and second nights as AS owners were spent in our AS "Courtesy Camping" in another AS owners driveway (whom we had never met) so they could look through our AS and make sure we knew how everything worked, etc. A terrific couple to say the least, but indicative of all the AS owners we've since met.

I get the feeling SS owners are pretty much the same.

Turns out my father-in-law owns a SS. I knew he'd owned one, but I did not know he still has it. He lives all the way down near Key West, FL, but said it's mine if I want to have it. I believe he got it new back in the fifties. The last time I saw it I remember thinking it looked pretty rusty, but then what doesn't after a few years in that part of the world.

My wife and I are headed down there the end of April to join her brothers and sisters to celebrate her dad's 90th birthday. I'll get to see it then. From there we're heading to Cathedral City, CA for our oldest daughter's graduation from Dental Hygiene School. We'll be towing the AS and plan to spend the rest of the summer traveling around the Northwest, Yellowstone, etc. So, if I decide to take him up on his offer I'll have to swing back down to Florida on the way home to pick up the SS. It may be a bigger project than I want. :eek:
Woodhead
Just a chip off the ol' block!

1993 SS Mark V 510 with a 520 Upgrade, 520 Extension Fence (2) Extension Tables, (4) Floating Tables (4) connecting tubes (2) SS Band Saw, SS Jointer, SS Belt Sander, SS Power Station, SS DC3300
User avatar
letterk
Gold Member
Posts: 437
Joined: Wed Mar 14, 2012 4:28 pm
Location: Minneapolis\St. Paul, MN

Post by letterk »

I'll be the first to say it. "ya know the Shopsmith can break down into parts pretty easily. Sure you don't want to bring it with you to Yellowstone?"
User avatar
woodhead52
Gold Member
Posts: 86
Joined: Mon Jan 14, 2013 2:10 pm
Location: Virginia Beach, VA

Post by woodhead52 »

letterk wrote:I'll be the first to say it. "ya know the Shopsmith can break down into parts pretty easily. Sure you don't want to bring it with you to Yellowstone?"
I doubt that will happen, but I've been know to flip flop on occasion. If I were the only one voting it would stand a better chance. ;)
Woodhead
Just a chip off the ol' block!

1993 SS Mark V 510 with a 520 Upgrade, 520 Extension Fence (2) Extension Tables, (4) Floating Tables (4) connecting tubes (2) SS Band Saw, SS Jointer, SS Belt Sander, SS Power Station, SS DC3300
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

woodhead52 wrote:So, if I decide to take him up on his offer I'll have to swing back down to Florida on the way home to pick up the SS. It may be a bigger project than I want. :eek:

Wouldn't it be CHEAPER in gas and time to just take it with ya the first time?]
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
woodhead52
Gold Member
Posts: 86
Joined: Mon Jan 14, 2013 2:10 pm
Location: Virginia Beach, VA

Post by woodhead52 »

beeg wrote:Wouldn't it be CHEAPER in gas and time to just take it with ya the first time?]


All excellent points my wife will never consider. :)

Seriously, this will be such a long trip (about 3 or 4 months on the road) that we'll be packed to gills with stuff we'll take with us. The back of my short bed truck is where I'd have to put it (doubt the wife would be willing to hold the headstock in her lap for 8 thousand miles) and I'd probably hate the damn thing by the time we got home, having to move it around every time I wanted to get our bikes, generator, etc, out of the back. Besides, going to Key West twice in a year is not really a bad thing. :)
Woodhead
Just a chip off the ol' block!

1993 SS Mark V 510 with a 520 Upgrade, 520 Extension Fence (2) Extension Tables, (4) Floating Tables (4) connecting tubes (2) SS Band Saw, SS Jointer, SS Belt Sander, SS Power Station, SS DC3300
shortslvs
Gold Member
Posts: 47
Joined: Fri Dec 21, 2012 10:56 am
Location: Lancaster, CA

Post by shortslvs »

While there the first time ship it home to a buddy. You can make sure it is broke down and boxed up how you want it, insure it and then coming home is like Christmas. :)

BTW garage didn't get so much cleaned as rearranged and you aren't going to believe this, but I have found another deal I can't pass up, so tomorrow I am making another road trip. I can't tell you guys for what or where until I get back. Not that I don't trust you guys. I am sure none of my Cali buddies would try to snipe my find :) Actually I would probably be better off considering this obvious problem I have with purchasing equipment.

You may be shaking your head with concern, but when I get back with it you will all say something like "OOOOOHHH well yeah he had to get that!"
shortslvs
Gold Member
Posts: 47
Joined: Fri Dec 21, 2012 10:56 am
Location: Lancaster, CA

Post by shortslvs »

Oh I forgot something. Chuck (Local SS owner) is coming over on Monday around noon and he is going to show me how to use all this stuff I bought.

I am sure Chuck is reading this and thinking "He said we were having lunch". ;)

My wife suggested I let Chuck have whatever he sees out in the garage that he takes a shine too. She thinks she's funny :)
User avatar
terrydowning
Platinum Member
Posts: 1678
Joined: Mon Jul 19, 2010 3:26 pm
Location: Windsor, CO

Post by terrydowning »

If you have any left over 510 parts you don't want or need. I know a guy who's not too far from the AV. :) :) :)
--
Terry
Copy and paste the URLs into your browser if you want to see the photos.

1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g

Public Photos of Projects
http://sdrv.ms/MaXNLX
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

shortslvs wrote:.... Actually I would probably be better off considering this obvious problem I have with purchasing equipment.

You may be shaking your head with concern, but when I get back with it you will all say something like "OOOOOHHH well yeah he had to get that!"

Yes!:eek: I'm shaking my head.

BTW, do you have a copy of PTWFE (Power Tool Woodworking For Everyone)?
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

shortslvs wrote:...My wife suggested I let Chuck have whatever he sees out in the garage that he takes a shine too. She thinks she's funny :)

She IS funny:D, But that might be an excellent idea:rolleyes:.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Post Reply