Springfield, MO - New to Shop Smith

mark030569 · Post by **mark030569** » Sun Dec 30, 2012 1:39 pm

I am new to the world of Shop Smith. I received my father's Shop Smith when he passed and I am trying to learn how to use it. I have watched some of the videos on the site but would like more of a hands on approach. Is anyone in the Springfield, MO area that would like to make some extra money teaching me how to use my shop smith?

Thank you,
Mark Jacques

joedw00 · Post by **joedw00** » Sun Dec 30, 2012 2:01 pm

I don't know what video's you have watch, but you might want to check this out. Shopsmith Sawdust Sessions Nick explains a lot about the Shopsmith.

backhertz · Post by **backhertz** » Sun Dec 30, 2012 7:06 pm

Mark,
I can only speak for myself, but I would be happy to show you how to use your shopsmith for free. If you received a complete system, you'll have received 3 book- PTWFE, and a Shopsmith manual on the operation of the Shopsmith and doing maintenance on it. Also, included is a training manual that you can practice on using the Shopsmith.

Read every one of them. It's important that you know how every tool operates and how to safely use it.

You will find many videos on You Tube. You have two things goals. 1. Using the Shopsmith and 2. learning about wood & woodworking. The Shopsmith can help you do a lot, but it has to be maintained and operated in a safe manner every time you use it. Woodworking to me is a life-long lesson journey, at least for me.

What is the year, model, and serial number of your Shopsmith? There might be some upgrades or other things that over time need to be inspected or replaced.

First thing you want to do is clean it & wax it as the directions. You could have a used Mark V made in 1954 or 2012. There are many people still using the Shopsmith 10E/ER manufactured in 1947 to 1953. There is a huge 10E/ER Yahoo Forum group with guys who are just as devoted as the Mark V members are here.

Welcome aboard & good luck. p.s. Post as many pics as you can & we can better help you.

major_bob · Post by **major_bob** » Sun Dec 30, 2012 9:31 pm

I'm no expert. Certainly not in the same league with many of the guys on this forum but I am nearby and willing to help. I've learned a lot over the last 5 years. Mostly by asking questions here. You can't find a better source of information and community of people eager to share their knowledge.

edinbako · Post by **edinbako** » Mon Dec 31, 2012 12:10 am

Welcome to the forum, Mark. These folks will help you a great deal with what ever you want to know. Woodworking is fun and therapeutic, although addicting, as you will see.

hdoilcan · Post by **hdoilcan** » Mon Dec 31, 2012 2:39 am

Welcome to the forum!

mark030569 · Post by **mark030569** » Wed Jan 02, 2013 11:32 pm

Thank you everyone for your help and input. I am starting to watch video's and watched the maintenance one. Took the head apart and I bet it has never been cleaned. I have started the maintenance to make sure everything is running right and safe. I am sure I will post more questions in my journey.

Thanks Again,

Mark

teacherman · Post by **teacherman** » Tue Mar 11, 2014 1:46 am

Do you have any pictures of the machine?
If you go to the repair and maintenance part of the site, you will find many interesting bits of info. One thing is to find out if there are lube holes on the sheaves, which i found out are the aluminum sliding pulleys on the shafts. There is a way to add the holes if you are careful. Also lots of info on rewiring and such. Good luck!