Newowner Informaton
Moderators: HopefulSSer, admin
New to me Mark V, Ready to Dive in.
Hello Gentlemen,
Thank you for allowing me to join your wonderful forum! A few years ago I was given an old Mark V that's been sitting patiently in my garage for attention ever since. Now that I've found this treasure trove of information restoring her seems possible.
All the Best,
Dave
Thank you for allowing me to join your wonderful forum! A few years ago I was given an old Mark V that's been sitting patiently in my garage for attention ever since. Now that I've found this treasure trove of information restoring her seems possible.
All the Best,
Dave
Dave
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Newowner Informaton
Welcome to the Zoo!
Remember there are no dumb questions.
We been there scratched our heads also!![Roll Eyes (Sarcastic) :rolleyes:](./images/smilies/rolleyes.gif)
![Big Grin :D](./images/smilies/biggrin.gif)
Remember there are no dumb questions.
![Smile :)](./images/smilies/smile.gif)
We been there scratched our heads also!
![Roll Eyes (Sarcastic) :rolleyes:](./images/smilies/rolleyes.gif)
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Newowner Informaton
Thank you JPG. I'm still trying to get my sea legs here; there's a lot to learn. Would you be so kind to let me know where I can find the original 1955 Mark V packing list? I'd like to know if I'm missing anything. I downloaded the MKVSTDPartsList _1_14.pdf but it appears to be for a later model.
Thank you again,
Dave
Thank you again,
Dave
Dave
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Newowner Informaton
I do not have such a list, but can show you what came with my 1963 Goldie.DMcCam wrote:Thank you JPG. I'm still trying to get my sea legs here; there's a lot to learn. Would you be so kind to let me know where I can find the original 1955 Mark V packing list? I'd like to know if I'm missing anything. I downloaded the MKVSTDPartsList _1_14.pdf but it appears to be for a later model.
Thank you again,
Dave
Should be visible after Admin kills the bug again.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Newowner Informaton
Wow, Thanks JPG!
I can't see from the image, did the table come with a saw guard? If not, it looks like I've got the lot including the casters and a few more saw blades!
Dave
I can't see from the image, did the table come with a saw guard? If not, it looks like I've got the lot including the casters and a few more saw blades!
Dave
Dave
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Newowner Informaton
No. It was an 'extra cost' accessory.DMcCam wrote:Wow, Thanks JPG!
I can't see from the image, did the table come with a saw guard? If not, it looks like I've got the lot including the casters and a few more saw blades!
Dave
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Newowner Informaton
I guess so! Back in the day it would have been like spending $200 today.
In reviewing the list, I've got the Table Insert Dado, Add-A-Coupler, Front Table Extension and Miter Gauge Safety Grip. I also have the Jointer. If everything cleans up OK, I'll have a good start.
Thank you again,
Dave
In reviewing the list, I've got the Table Insert Dado, Add-A-Coupler, Front Table Extension and Miter Gauge Safety Grip. I also have the Jointer. If everything cleans up OK, I'll have a good start.
Thank you again,
Dave
Dave
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Mark V, No Access Port
Hi Guys,
My Mark V does not have the access port opposite the speed control dial. How do you do check inside the housing without the port? Can you see anything by removing the Quill? I'm hoping to do a visual check before having to do a complete tear-down of the headstock.
Also, I managed to remove the speed control handle using a 5/64" Allen wrench but on the video the technician says to use a 3/32". Do the new handles use a larger size or do you think this is a mismatched replacement from the original owner?
Thank you in advance,
Dave
My Mark V does not have the access port opposite the speed control dial. How do you do check inside the housing without the port? Can you see anything by removing the Quill? I'm hoping to do a visual check before having to do a complete tear-down of the headstock.
Also, I managed to remove the speed control handle using a 5/64" Allen wrench but on the video the technician says to use a 3/32". Do the new handles use a larger size or do you think this is a mismatched replacement from the original owner?
Thank you in advance,
Dave
Dave
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
- JPG
- Platinum Member
- Posts: 34642
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Newowner Informaton
Dropping the motor pan(and motor).
That gets you in for a good look.
If the screw/allen wrench fit, do not 'fix' it.
The movable sheaves likely do not have an oil hole either.(if original)
The belt cover comes off easily.
The motor/motor pan removal is easier if you raise to vertical, install the table backwards(from the 'bottom' of the carriage) and use the table to support the motor and pan(heavy).
FWIW, you have an "A" headstock casting. You may also have a Gilmer drive.
That gets you in for a good look.
If the screw/allen wrench fit, do not 'fix' it.
The movable sheaves likely do not have an oil hole either.(if original)
The belt cover comes off easily.
The motor/motor pan removal is easier if you raise to vertical, install the table backwards(from the 'bottom' of the carriage) and use the table to support the motor and pan(heavy).
FWIW, you have an "A" headstock casting. You may also have a Gilmer drive.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Newowner Informaton
Thank you very much JPG for your excellent tutorial. Your help is greatly appreciated kind Sir. I'll take a peak inside once I can get her cleaned up a bit. The guide tubes are pretty rough and moving the headstock or table is quite difficult right now. Probably need to post some pictures too.
Gratefully,
Dave
Gratefully,
Dave
Dave
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11
Reno, NV
Mark 5 "Greenie" SN 290470, Born March '55, Acquired April '11