I just decided to get these, instead of buying elsewhere.
521987 1/2" Bandsaw blade
556142 4-80 grit ceramic
Elsewhere: Home Depot, Lowes & or Amazon.
Why: None of those three had the actual length of the band saw blade and Amazon has 12 inch disks, but only red oxide and not ceramic. SS price for the ceramic disks are near, what Amazon's red oxide disks sell for. So, this decision was a no brainer.
My band saw will 'now, only' be dedicated to being used for resawing. I use a lot of rough cut lumber and the band saw, should be well suited for resawing, with the above blade!
Premium band saw blades & ceramic disks
Moderator: admin
Premium band saw blades & ceramic disks
I am a true blue Xylophiliac, who also is a Nemophiliac 
Re: Premium band saw blades & ceramic disks
Just saw your post. I have found the Highland Wood Slicer blade to be the best you can buy.
http://www.highlandwoodworking.com/wood ... to137.aspx
Its best for re-sawing but I use it for everything.
http://www.highlandwoodworking.com/wood ... to137.aspx
Its best for re-sawing but I use it for everything.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Premium band saw blades & ceramic disks
sehast wrote:Just saw your post. I have found the Highland Wood Slicer blade to be the best you can buy.
http://www.highlandwoodworking.com/wood ... to137.aspx
Its best for re-sawing but I use it for everything.
Some folks here swear by the Timberwolf resaw blade.
I have the woodslicer and also am too lazy to take it off for occasional other tasks. Quite satisfied with it!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Premium band saw blades & ceramic disks
I have both here and neither one is better or worse than the other. They both cut the same. The only difference is the Timberwolf is cheaper than the Wood Slicer if you buy direct from Timberwolf. At least it was the last time I checked.JPG wrote:sehast wrote:Just saw your post. I have found the Highland Wood Slicer blade to be the best you can buy.
http://www.highlandwoodworking.com/wood ... to137.aspx
Its best for re-sawing but I use it for everything.
Some folks here swear by the Timberwolf resaw blade.
I have the woodslicer and also am too lazy to take it off for occasional other tasks. Quite satisfied with it!
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT