somebody put end rails for a SS on e-bay and I got them
had a piece of 3/4" birch plywood left out from making some jigs and a
1x1x1/8 aluminum angle
I started out making a new floating table, but I said hay I can mount my router on it. Now I can use my fence or mount my shaper fence on it.
While making I wish I had 1/4" thick angle, because I had to thread for the knob locks. 1/8" material is just a little to thin and the thread went through the angle. Had to put a thin washer between the angle and knob lock.
wish I had more rails from a 510 to make floating tables and out riggers.
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. Albert Einstein
The Greatness officially starts
Greenie, Grayling, SS stand alone BS and BS SPT, jointer and belt sander, 3 Ers with Speed Changers. I think those 3 cover my ER needs, and space for them.
The floating table has the old version rails but with the newer jack screws.
The router table has the new version of the rails, but with the old version jack screws.
Regardless it is a nice setup!!!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
I got 8 new version of jack screw with the rails. I put the new version of the jack screw on my table and extensions, so I used the old one for the router table. The reason is that I will use the table and extension more than I will the router table. I used what I have.
