JPeG, kindly "Google" 'schmuck.'JPG wrote: A favorite place for 'schmuck' to accumulate.
Wait, did it for you.
https://en.wikipedia.org/wiki/Schmuck_(pejorative)
steve
First Post: Inherited Rusty Mark V. Now What?
Moderator: admin
Re: First Post: Inherited Rusty Mark V. Now What?
Wait, did it for you.
https://en.wikipedia.org/wiki/Schmuck_(pejorative)
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: First Post: Inherited Rusty Mark V. Now What?
Realize Nick is addressing 'the masses'.
Many here are far more adventuresome and would 'fix' it.
When the Quill return spring is the subject, 'adventuresome' is a gross understatement however one can persevere.
When removing the speed control, be careful to not miss/drop/lose the very small spring behind the outer dial. Note how it goes in the equally small slots/grooves.
Since you seem to be about to get into the complete innards, it is a good idea to remove the motor pan and motor so as to greatly reduce the weight. Worst part is reinstalling the power switch. There is a way to prevent that for the future.
I realize 'we' are getting 'into' this far more than you likely anticipated, but you are gaining an understanding of what this beast is and will allow quick unaided response by thee to any future 'issue'.
Many here are far more adventuresome and would 'fix' it.
When the Quill return spring is the subject, 'adventuresome' is a gross understatement however one can persevere.
When removing the speed control, be careful to not miss/drop/lose the very small spring behind the outer dial. Note how it goes in the equally small slots/grooves.
Since you seem to be about to get into the complete innards, it is a good idea to remove the motor pan and motor so as to greatly reduce the weight. Worst part is reinstalling the power switch. There is a way to prevent that for the future.
I realize 'we' are getting 'into' this far more than you likely anticipated, but you are gaining an understanding of what this beast is and will allow quick unaided response by thee to any future 'issue'.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: First Post: Inherited Rusty Mark V. Now What?
Consider it to be what is on the floor of a German stable.skou wrote:JPeG, kindly "Google" 'schmuck.'JPG wrote: A favorite place for 'schmuck' to accumulate.
Wait, did it for you.
https://en.wikipedia.org/wiki/Schmuck_(pejorative)
steve
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange