DC3300 Dust Collector

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

fixit wrote:...I have one mounted on a Delta collector and have been very pleased with it for over a year now. The bag that came with the collector put out dust (only caught stuff 3 micron size or larger if I remember correctly) but the smaller stuff - the stuff that causes lung damage - just went right through the bag...
I believe you are right on about the smaller particles. Of course, there is some consideration with wood about sensitive people and some woods having irritating properties/chemicals that can cause damage to folks even with the larger particles.

When dealing with size, I think back to Missoula Montana where an inversion layer sets in every winter and is very stubborn and persisted for weeks. We were violating Federal and the more stringent State Air Quality Standards. During the 70s and 80s the major pollutants in the air (trapped below the inversion) were: 1) Wood smoke and 2) Dust from road sand (so folks could stop their cars at intersections. The smoke was mostly from stoves and fireplaces. We were told the smallest particles of the smoke were the most harmful as we couldn't cough them up. They got into our bloodstreams. It was also said by the health people we could cough up the larger smoke particles.

I now reason if it is possible to cough up larger particles of smoke, we can surely cough up much of the fine sawdust we may inhale. (Actually I don't want to inhale any of it.) So, it seems the best thing we can do is avoid inhaling any wood dust. The small, floating parts of the sawdust are the ones we really want to trap. Air filters, home made, and commercial are a good deal. Although I don't have one of these, I do have a roof mounted whirligig vent. It works as a passive dust extractor. With a light breeze (which we always have here) will suck a piece of cardboard up to the ceiling side of the vent. The inside vent hole is 8" in diameter, so I feel it is removing a lot of the floating dust.

Irritants in some woods are another matter. I think these can only be avoided by non-use of such woods, or wearing an appropriate dust mask and proper clothing.

BTW. - Missoula has outlawed closed (glass door, etc.) fireplaces, does not allow fireplaces in new homes and requires all new stoves have catalytic converters on the flue, or otherwise proven non-polluting. These conversions must be made upon selling a home. No more gravel mixed with salt on the streets. Only salt - and I noticed that the salt water freezes and turns to very slippery ice during much of the winter. - a new hazard!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
putttn
Gold Member
Posts: 410
Joined: Sat Feb 17, 2007 11:44 am
Location: Spokane, Wa Home of the ZAGS
Contact:

Post by putttn »

I believe there is a video on the wynn website that explains and talks about the filtering capabilities.
Dusty, I'd get one if it would fit on the DC3300. I'll give Wynn a call next week to see if there filter fits the DC3300.
User avatar
chrispitude
Gold Member
Posts: 226
Joined: Sat Feb 23, 2008 9:18 pm
Location: Saylorsburg, PA

Post by chrispitude »

Some interesting material on dust collection here:

http://billpentz.com/index.cfm

in the section entitled "Cyclone and Dust Collection Research".

- Chris
User avatar
Nick
Platinum Member
Posts: 808
Joined: Mon Aug 28, 2006 4:04 pm
Location: Dayton, Ohio
Contact:

Post by Nick »

You folks might want to consider that the 1-micron Wynn Spun Bond filter at $147 is no more effective than the 1-micron Shopsmith 42" filter at $72. And they are both lifetime filters.

With all good wishes,
putttn
Gold Member
Posts: 410
Joined: Sat Feb 17, 2007 11:44 am
Location: Spokane, Wa Home of the ZAGS
Contact:

Post by putttn »

Thanks Nick. I wondered if the larger filter bag would be as good as the Wynn. Solves the problem of having to somehow make the Wynn fit. It would seem to me that SS should just come out with the larger bag and not have to mess with the smaller ones, especially if it is a health related issue.
putttn
Gold Member
Posts: 410
Joined: Sat Feb 17, 2007 11:44 am
Location: Spokane, Wa Home of the ZAGS
Contact:

Post by putttn »

I realize this is off the main subject but I did a little research on the CT22 Festool dust extractor I have and found that it filters down to .3 microns with the use of Heppa filters.
Wonder if there's a way to use the Heppa filters with the DC3300?
User avatar
Nick
Platinum Member
Posts: 808
Joined: Mon Aug 28, 2006 4:04 pm
Location: Dayton, Ohio
Contact:

Post by Nick »

Square peg; round hole. Literally and figuratively.

With all good wishes,
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

Nick,

I am totally sold on the one micron Shopsmith bag. It truly works as advertised. I am also appreciative of the haloween idea for the original bag. Now how do I sell my grandaughter on the idea. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

You might have more trouble convincing Grandma.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

Actually Dusty it is our grandaughter who has the strong feelings. Having just spent several days in their Denver home there is no question about who rules there. She had issues with her grandmothers wishes while her Mother and I were off fishing in Alaska. We had numberous phone calls placed to Mom by her 8 year old so Mom to "try" and convince her to go along with Grandma. Comical? Sometimes perhaps. fjimp
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
Post Reply