Digging in
Moderator: admin
Digging in
Nasty storm headed this way , winds of 70mph up to 2 ft of snow across the east according to the news,,,,,next week it will probably be in the 70's again!
glad I didn't put the snow plow away.
glad I didn't put the snow plow away.
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- everettdavis
- Platinum Member
- Posts: 2163
- Joined: Thu Jul 17, 2014 11:49 am
- Location: Lubbock, TX
Re: Digging in
Sounds more like preparing to dig out.
Everett
Everett
Re: Digging in
Been there!!!everettdavis wrote:Sounds more like preparing to dig out.
Everett
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
Re: Digging in
We have been pretty lucky at dodging the bullet this past year. We have had some wind damage but no 20 below temps and no really huge snows. It has mostly been in northern Indiana or some down toward the Ohio River Valley. A number of bad streaks have been within 50 miles of us but missed us. I suspect at some point we will have to pay our dues...
.
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
Re: Digging in
Your storm is just leaving here tonight. It has been hanging around here building up strength since yesterday. It was weak here with very little wind and less than a foot of snow, but I understand it won't stay weak as it heads east to you.
For us, it didn't do much. It amounted to just a normal March snow here.
Hopefully it won't be to tough on you either.
It did snow enough to tally us up to 6 feet of snow for the winter so far.
For us, it didn't do much. It amounted to just a normal March snow here.
Hopefully it won't be to tough on you either.
It did snow enough to tally us up to 6 feet of snow for the winter so far.
Re: Digging in
We are almost recovered from a severe wind storm here in Rochester. Wind did a lot of damage here on Wednesday and now it's Sunday and not all folks have power restored. This new storm is just what we don't need. Storm warning from Monday at 10PM to Wednesday at 10PM. My wife and I are supposed to fly out on Wednesday morning for a moth long trip to Japan. Keeping my fingers and toes crossed.
GeorgeM
GeorgeM
Last edited by GeorgeM on Sun Mar 12, 2017 11:50 pm, edited 1 time in total.
Re: Digging in
I am not sure why,,,,,, but here,,,, 6in of snow is like 6ft in the western mountains .
I chained the tires up in the semi so many times out west ,,it was normal ,,,, now if I have to shovel off the porch I cringe!!
It is the wind we are supposed to get that has me worried on this one.
I chained the tires up in the semi so many times out west ,,it was normal ,,,, now if I have to shovel off the porch I cringe!!
It is the wind we are supposed to get that has me worried on this one.
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Digging in
Good luck with the weather, ll of you in ther storm area.
I have been there and done that. That is why I am here.
I have been there and done that. That is why I am here.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- BuckeyeDennis
- Platinum Member
- Posts: 3812
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Digging in
What part of OH are you in, Hobbyman? Here in Central OH, no winds over about 20 mph are forecast.
I'm no fan of harsh winters, but I wouldn't mind an opportunity to put my new generator and associated DIY house wiring to a real-world test. At least once.
I'm no fan of harsh winters, but I wouldn't mind an opportunity to put my new generator and associated DIY house wiring to a real-world test. At least once.
Re: Digging in
North of columbus a bit, forecast was 4-6in by tuesday ,,, strong winds gusting up to 70 mph is what 10 tv was saying
Hobbyman2 Favorite Quote: "If a man does his best, what else is there?"
- General George S. Patton (1885-1945)
- General George S. Patton (1885-1945)