stock repair

[Hobbyman2]

20170814_204450.jpg (338.37 KiB) Viewed 4927 times

20170815_010451.jpg (255.36 KiB) Viewed 4927 times

20170815_131338.jpg (242.22 KiB) Viewed 4927 times

20170815_131355.jpg (267.32 KiB) Viewed 4927 times

20170815_142549.jpg (235.6 KiB) Viewed 4927 times

20170815_142532.jpg (244.21 KiB) Viewed 4927 times

20170815_142601.jpg (264.13 KiB) Viewed 4927 times

20170815_172050.jpg (242.64 KiB) Viewed 4927 times

20170815_172101.jpg (285.82 KiB) Viewed 4927 times

20170815_172107.jpg (220.03 KiB) Viewed 4927 times

Another old stock saved from the fire pit.

[Hobbyman2]

20170815_142532.jpg (244.21 KiB) Viewed 4926 times

20170815_142549.jpg (235.6 KiB) Viewed 4926 times

20170815_142601.jpg (264.13 KiB) Viewed 4926 times

20170815_172050.jpg (242.64 KiB) Viewed 4926 times

20170815_222645.jpg (242.44 KiB) Viewed 4926 times

20170815_222659.jpg (209.05 KiB) Viewed 4926 times

20170815_232926.jpg (227.55 KiB) Viewed 4926 times

20170815_232932.jpg (231.28 KiB) Viewed 4926 times

20170815_232940.jpg (205.89 KiB) Viewed 4926 times

20170815_232950.jpg (210.31 KiB) Viewed 4926 times

[nuhobby]

Looking Great!

Chris

[Hobbyman2]

Thanks

According to the serial numbers the gun was made in 1969 , makes the wood in the stock close to if not 100 years old .

Getting the oil out of the wood for the epoxy wold hold was a challenge , it took several hrs soaking and washing in acetone.

The walnut dowels were made using the SS and a home made jig