Today in a workshop far far away(Millennium Falcon)
Moderators: HopefulSSer, admin
Today in a workshop far far away(Millennium Falcon)
A person over in the Shaper Community posted a Millennium Falcon cheese board with the .svg file. So with my son loving anything and everything star wars this seem like something I really had to do but rather then a cheese board I went with the idea of a trivet.
Here it is just cut out and vacuumed:
Mahogany would not have been my first choice but that is what I had, well I could have used pine or plywood but hey who ever heard of a space ship made out of pine??
I didn't get it centered well but I trimmed the left edge before I sanded it. It now has a finish drying so maybe another picture of the finished trivet.
Ed
Here it is just cut out and vacuumed:
Mahogany would not have been my first choice but that is what I had, well I could have used pine or plywood but hey who ever heard of a space ship made out of pine??
I didn't get it centered well but I trimmed the left edge before I sanded it. It now has a finish drying so maybe another picture of the finished trivet.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in a workshop far far away(Millennium Falcon)
Done and ready for delivery each day until three.
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
- terrydowning
- Platinum Member
- Posts: 1678
- Joined: Mon Jul 19, 2010 3:26 pm
- Location: Windsor, CO
Re: Today in a workshop far far away(Millennium Falcon)
Is this CNC or Pattern routing? Guessing CNC since talking about a file.
Where do you get the tape with the domino pattern?
Where do you get the tape with the domino pattern?
- dusty
- Platinum Member
- Posts: 21374
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Today in a workshop far far away(Millennium Falcon)
Good questions. I have been watching Ed doing all of his SO postings hoping that I would get answers to a couple of my questions. Never have. How is the router guided? It appears to me to be manually.terrydowning wrote:Is this CNC or Pattern routing? Guessing CNC since talking about a file.
Where do you get the tape with the domino pattern?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
Re: Today in a workshop far far away(Millennium Falcon)
The SO is equipped with computer vision. The tape has I believe 256 possible unique patterns and the tape is placed out in rows or columns. The tape is then scanned in and a "map" is created within the machine.
Designs are done in vector generating software and a file called a .svg is what the SO uses. The file can be loaded off a memory stick or by way of the builtin wifi. The file can be sized and rotated before being placed. It can be placed on a grid or just any old where but as you travel around the area to be cut the SO has to "see" the tape and enough of the tape so it knows where it is.
Once placed it provides guidance as to where to move the router as well as correcting your movements within a certain amount. You can also tell it by way of a button punch to travel within it built in range without you moving anything or with you moving along while it is doing its thing.
If you are interested there are a lot of information out on the web about it.
It has given me a lot of capabilities that I did not have before. My initial thoughts were to use it to make pattern which in turn would be used with the pin router or guided bits or template guides. So far it has been too much fun to use all by itself that I just do the projects with it.
It is much like a cnc but a lot less time to prep because you provide the tool path and dept setting etc. But, you have to do the routing so you can't go off to lunch and come back and have a project cut out for you.
Biggest draw back for most people is the price. There is also a learning curve which I have just about peaked on but it was a little slow going when I started since it was so different.
If you have questions let me know and I will try and answer them.
Ed
Designs are done in vector generating software and a file called a .svg is what the SO uses. The file can be loaded off a memory stick or by way of the builtin wifi. The file can be sized and rotated before being placed. It can be placed on a grid or just any old where but as you travel around the area to be cut the SO has to "see" the tape and enough of the tape so it knows where it is.
Once placed it provides guidance as to where to move the router as well as correcting your movements within a certain amount. You can also tell it by way of a button punch to travel within it built in range without you moving anything or with you moving along while it is doing its thing.
If you are interested there are a lot of information out on the web about it.
It has given me a lot of capabilities that I did not have before. My initial thoughts were to use it to make pattern which in turn would be used with the pin router or guided bits or template guides. So far it has been too much fun to use all by itself that I just do the projects with it.
It is much like a cnc but a lot less time to prep because you provide the tool path and dept setting etc. But, you have to do the routing so you can't go off to lunch and come back and have a project cut out for you.
Biggest draw back for most people is the price. There is also a learning curve which I have just about peaked on but it was a little slow going when I started since it was so different.
If you have questions let me know and I will try and answer them.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in a workshop far far away(Millennium Falcon)
BTW it is now officially the "Mahogany Falcon". I delivered it today so I guess Christmas is here along with winter as of today.
Ed
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in a workshop far far away(Millennium Falcon)
I am ignorant. What does SO mean?
Bill V
Bill V
Re: Today in a workshop far far away(Millennium Falcon)
Shaper Origin, just a short way to say it.wa2crk wrote:I am ignorant. What does SO mean?
Bill V
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Re: Today in a workshop far far away(Millennium Falcon)
Ed's post was totally accurate. However, a little more explanation might be needed. The SO is moved manually. The SO router motor is computer controlled within 1/2" of your manual movements and compensates for your human inaccurate moments. The router motor move independently of your manual movement under computer control. If you manually go outside the 1/2" limit the computer will stop the router motor and retract the bit. As soon as you manually move the SO back inside the 1/2" limit as seen on the screen and press the start button the SO will start to cut again.dusty wrote:Good questions. I have been watching Ed doing all of his SO postings hoping that I would get answers to a couple of my questions. Never have. How is the router guided? It appears to me to be manually.terrydowning wrote:Is this CNC or Pattern routing? Guessing CNC since talking about a file.
Where do you get the tape with the domino pattern?
Since I don't think you ever asked your questions it is hard to know what answers you want.
This thing is a real game changer. As Ed said you can't go to lunch and come back and have a finished product. However, there is no size limit to what you can CNC rout.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
- dusty
- Platinum Member
- Posts: 21374
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Today in a workshop far far away(Millennium Falcon)
How does the SO know where the intended cut line is?
Should have done this before I asked. https://www.youtube.com/watch?v=CRR5gt0Uz-4
This gentleman answered all my questions without me asking.
Should have done this before I asked. https://www.youtube.com/watch?v=CRR5gt0Uz-4
This gentleman answered all my questions without me asking.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.