I'm getting back to my 10ER and am unsure how I want to finish the protractor.
10er protractor.jpg (141.4 KiB) Viewed 18298 times
I thought about polishing it but that would require a lot of work and time which I hate to try and fit in with other stuff I have to do.....
Or
Paint, masking the front, screw holes and bearing area for the knob. Not sure if the markers and numbers will be mask or sanding after and possible another color??
Just wondering what others have done, and BTW this is not at all traditional or an attempt to restore to original condition project.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
reible wrote:I'm getting back to my 10ER and am unsure how I want to finish the protractor.
10er protractor.jpg
I thought about polishing it but that would require a lot of work and time which I hate to try and fit in with other stuff I have to do.....
Or
Paint, masking the front, screw holes and bearing area for the knob. Not sure if the markers and numbers will be mask or sanding after and possible another color??
Just wondering what others have done, and BTW this is not at all traditional or an attempt to restore to original condition project.
Ed
All of the originals I have seen are grey with the numbers, degree marks and the knob surface bare metal. I glass blasted mine painted it and then cleaned the surfaces that should be bare metal. Sorry, I don't have a better picture but I am sure you get the point.
Attachments
IMAG0316.jpg (205.19 KiB) Viewed 18292 times
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Not sure how important keeping paint out of the detent grooves is.
Apparently John did not think so.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
That is one nice looking 10ER! Your shop looks a little too clean though.
Well, my wife does wood working also and she tends to keep things tidy. The Clearvue 2000CFM cyclone dust collector helps a lot. I also like to tidy things up a bit when I take pictures.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
That is one nice looking 10ER! Your shop looks a little too clean though.
Well, my wife does wood working also and she tends to keep things tidy. The Clearvue 2000CFM cyclone dust collector helps a lot. I also like to tidy things up a bit when I take pictures.
A wife that does woodworking AND helps keep the shop clean...that is a keeper for sure. You are one lucky guy! I am always envious when I see pics of your shop...both some of the equipment you have and the size of your shop. Plus you keep it clean. My hat is off to you, sir.
Like John after the metal is cleaned I paint it and remove the paint from the numbers and indexing marks. I have done several of these for the machines I have restored. On miters that have hit the blade I fill in the cut when possible before painting. Below is one that has been repaired. See the lower left corner in the picture.
Miter Face R36013.jpg (165.07 KiB) Viewed 18233 times
On the early Miters I leave them bare metal as they originally came.
Early Model 10E Miter.jpg (119.05 KiB) Viewed 18233 times
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
10 E miter head.jpg (244.07 KiB) Viewed 18210 times
10 ER miter head.jpg (256.18 KiB) Viewed 18210 times
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
RF Guy
