Band Saw Box Demo

RobertTaylor · Post by **RobertTaylor** » Thu Mar 05, 2020 1:56 pm

On February 8, 2020 I did a demo for The Buckeye Woodworkers and Woodturners on making Band Saw Boxes. Even though the Club has a decent 14"Delta I chose to take my own Shopsmith band saw. If interested take a look at the write-up in the Club's newsletter

https://www.bwwt.us/uploads/7/0/5/0/705 ... 0_bwwt.pdf

mar_2020_bwwt.pdf: (1.88 MiB) Downloaded 1012 times

reible · Post by **reible** » Thu Mar 05, 2020 5:46 pm

Do you have your bandsaw on a stand or did you have to bring a whole machine?

Good to use machines you know and maybe good pr for shopsmith.

I haven't made a bandsaw box in years, should give it a go again this summer, maybe the one like the log you did.

Ed

RobertTaylor · Post by **RobertTaylor** » Thu Mar 05, 2020 7:33 pm

Thanks Ed. This band saw is on a Shopsmith stand. Bob

JPG · Post by **JPG** » Fri Mar 06, 2020 10:26 am

Have you shimmed the table to make the blade perpendicular to the table 'front to rear'(tooth to spine) or did you only check for table 'tilt'?

Shopsmith Forums

Band Saw Box Demo

Band Saw Box Demo

Re: Band Saw Box Demo

Re: Band Saw Box Demo

Re: Band Saw Box Demo