DIY Mounting Base?
Moderators: HopefulSSer, admin
DIY Mounting Base?
I've been keeping my Magna Jointer on its side on a deep shelf but need a better way to store it as it is a pain to get it in and out when I need it. Thinking of building a dedicated shelf for it and found the Mounting Base (505655) on the ShopSmith website. Before I shell out $55 plus shipping, has anyone on here built their own stand for their SPT? If so, care to share the plans?
"The first step to shaping the future is to clearly see where things stand in the present."
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
- JPG
- Platinum Member
- Posts: 34643
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: DIY Mounting Base?
Stacked 2x4 with 1 1/2" pair of holes.
May need to account for eccentric posts or collars.
May need to account for eccentric posts or collars.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: DIY Mounting Base?
4x4 drilled with 1 1/2" holes. A piece of 2x4 on the side keeps it from tipping. My used belt sander came with something similar on wheels that I keep a bandsaw on now.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: DIY Mounting Base?
Well that is easy enough. Thanks for the replies.
"The first step to shaping the future is to clearly see where things stand in the present."
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: DIY Mounting Base?
Some of my SPT"s are stored on the Shopsmith Mounting Bases. That is my Jointer, Jig Saw, Belt Sander, Band Saw and Strip Sander. My Scroll Saw always sits on one of my Power Stations. I did make a wood mounting for the Extension Table on my accessories cart to keep it on when it is not on my Mark V 520. That's the same cart my SPT's stored on Mounting Bases are on. I made special wood mounting blocks for my Model 10 Jig Saw and Model 10 Jointer the Model 4E since neither has SPT mounting posts. Either way, wood blocks or the Mounting Base, work well for storage.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: DIY Mounting Base?
Use caution in your design if your Jointer is set up for dust/chip collection. Those plastic parts can't take the weight of the Jointer. I used to use a drilled 2X and it didn't work for a newer Jointer.
- David
- David
Re: DIY Mounting Base?
Mine is set up with those plastic parts. Thanks for the heads up on that. I can try the 4x4 method with some cutouts for the plastic parts. If that fails, then I'll just have to buy the mounting base.
"The first step to shaping the future is to clearly see where things stand in the present."
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
Re: DIY Mounting Base?
I'd be interested to see what your accessories cart looks like ...and take some ideas from itchapmanruss wrote: ↑Wed Jan 06, 2021 2:59 pm Some of my SPT"s are stored on the Shopsmith Mounting Bases. That is my Jointer, Jig Saw, Belt Sander, Band Saw and Strip Sander. My Scroll Saw always sits on one of my Power Stations. I did make a wood mounting for the Extension Table on my accessories cart to keep it on when it is not on my Mark V 520. That's the same cart my SPT's stored on Mounting Bases are on. I made special wood mounting blocks for my Model 10 Jig Saw and Model 10 Jointer the Model 4E since neither has SPT mounting posts. Either way, wood blocks or the Mounting Base, work well for storage.
"The first step to shaping the future is to clearly see where things stand in the present."
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
1956 Shopsmith Mark V (500)
2020 Shopsmith Mark 7
Re: DIY Mounting Base?
RF Guy
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Mark V 520 (Bought New '98) | 4" jointer | 6" beltsander | 12" planer | bandsaw | router table | speed reducer | univ. tool rest
Porter Cable 12" Compound Miter Saw | Rikon 8" Low Speed Bench Grinder w/CBN wheels | Jessem Clear-Cut TS™ Stock Guides
Festool (Emerald): DF 500 Q | RO 150 FEQ | OF 1400 EQ | TS 55 REQ | CT 26 E
DC3300 | Shopvac w/ClearVue CV06 Mini Cyclone | JDS AirTech 2000 | Sundstrom PAPR | Dylos DC1100 Pro particulate monitor
Re: DIY Mounting Base?
Here's what I did. After landing the adjustment knob on the bracket a few times, I put some magic marker arrows and guides on the jointer
and holder to avoid crushing anything important. I just used scraps I had laying about.
b
and holder to avoid crushing anything important. I just used scraps I had laying about.
b