Heads Up - Bargain 'available'
Moderators: HopefulSSer, admin
Re: Heads Up - Bargain 'available'
Facebook Marketplace - Sulphur Springs TX - Price drop from $1800 to $1200
https://www.facebook.com/marketplace/it ... 088e0d3f19
510, planer, bandsaw, scroll saw, joiner, tenon jig, power station.
https://www.facebook.com/marketplace/it ... 088e0d3f19
510, planer, bandsaw, scroll saw, joiner, tenon jig, power station.
Re: Heads Up - Bargain 'available'
Noticed several machines on Craig's List dropping in price. I think people hope to get a good price in the spring but understanding the reality by summer time. By the fall they'll go even in lower.
Here's one that just popped up from a Craig's List alert while I've been writing this post, a 500 with extras, looks like the headstock was replaced and has the old parts too, down to $300 from $350 originally. Pretty good deal for a starter machine or if you want a second one.
https://boston.craigslist.org/sob/tls/d ... 23339.html
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
-
- Platinum Member
- Posts: 788
- Joined: Sat Aug 08, 2015 11:23 am
- Location: Marion, Iowa
Re: Heads Up - Bargain 'available'
Greenie in need of work for $75. https://cedarrapids.craigslist.org/tls/ ... 04205.html
10ER with speed changer $200. https://waterloo.craigslist.org/tls/d/w ... 66838.html
10ER with speed changer $200. https://waterloo.craigslist.org/tls/d/w ... 66838.html
Brenda
1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
- JPG
- Platinum Member
- Posts: 34647
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
RE: Heads up Bargin Available
We need more room in our garage, sadly we must sell our overhauled Greenie.
All said & done we had slightly over $1,000 in new ShopSmith parts for the overhaul. (fully documented on the ShopSmith Maintance fourm viewtopic.php?f=10&t=23864)
The Greenie works well but we need the room it currently occupies.
Details: Working condition greenie mark 5 shopsmith. Recently had all belts and bearings replaced. New 12 ga. (20 amp) electrical cord 15 feet in length for greater access to 110v electrical outlets. All parts were dissassembled, cleaned & inspected and replaced if found damaged.
Included parts are: extension table, rip fence, tool rest arm, lathe tool rest, lathe turning tool set, 2 circular saw blades, sanding disc, Jig Saw attachment,Planer attachment and tailstock.
We are located right off Interstate 81 on the Pennsylvaina side of the PA MD border.
Asking $400 O.B.O.
Thank you for your intrest.
Shawn
All said & done we had slightly over $1,000 in new ShopSmith parts for the overhaul. (fully documented on the ShopSmith Maintance fourm viewtopic.php?f=10&t=23864)
The Greenie works well but we need the room it currently occupies.
Details: Working condition greenie mark 5 shopsmith. Recently had all belts and bearings replaced. New 12 ga. (20 amp) electrical cord 15 feet in length for greater access to 110v electrical outlets. All parts were dissassembled, cleaned & inspected and replaced if found damaged.
Included parts are: extension table, rip fence, tool rest arm, lathe tool rest, lathe turning tool set, 2 circular saw blades, sanding disc, Jig Saw attachment,Planer attachment and tailstock.
We are located right off Interstate 81 on the Pennsylvaina side of the PA MD border.
Asking $400 O.B.O.
Thank you for your intrest.
Shawn
- JPG
- Platinum Member
- Posts: 34647
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
Good Luck and sorry it is necessary.
Anyone interested should PM Ssmall.
Anyone interested should PM Ssmall.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Heads Up - Bargain 'available'
This one is certainly a bargain if you need parts or have a few extras. Only $50 for the machine. Located in Maine though. Too close to the Arctic Circle for me.
https://maine.craigslist.org/tls/d/manc ... 38756.html
https://maine.craigslist.org/tls/d/manc ... 38756.html
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
-
- Platinum Member
- Posts: 788
- Joined: Sat Aug 08, 2015 11:23 am
- Location: Marion, Iowa
Re: Heads Up - Bargain 'available'
Brenda
1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
1998 510 upgraded to a 520, upgraded to power pro with double tilt and lift assist.
1998 bandsaw
2016 beltsander
jointer
overarm pin router
Re: Heads Up - Bargain 'available'
$50 for what they call “ShopSmith”, and it’s a bad angle photo, but looks like it may be an Overarm Pin Router to me. In Riverside, California, which is a couple hours north of San Diego and east of Los Angeles.
https://inlandempire.craigslist.org/tls ... 56699.html
https://inlandempire.craigslist.org/tls ... 56699.html
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
- JPG
- Platinum Member
- Posts: 34647
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
Appears to include the router.
Go Get it!
Go Get it!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange