My Growth Rings with Scott Markwood
Moderators: HopefulSSer, admin
🔴 LIVE STUMPED? Q&A: How to Make Fast, Perfect Wooden Circles
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/j4ZQ28EysM4
This LIVE video is the mid-week follow-up to this past weekend's video titled: "How to Make Fast, Perfect Wooden Circles". If you missed it, catch it here: https://youtu.be/sP4bZaW6vqo
Subscribe to the channel here: https://tinyurl.com/xz44rxmu
SCARY!!! Safely Routing Large Profiles on Small Wooden Circles
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/zPKVNuLsb6g
Continuing on the build of the hurricane candle bases, today I'm routing the edge profile with a rather large bit, considering the size of these discs. There's also a little lesson about router slippage!
Subscribe to the channel here: https://tinyurl.com/xz44rxmu
Drilling "Tippy" Wood Parts: A Simple Drill Press Fixture
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/mv7EXIth1pI
Continuing on the build of the hurricane candle bases, today I'm laying out and drilling for three wooden "feet", directly over a large router profile, which is creating a rather "tippy" foundation.
Subscribe to the channel here: https://tinyurl.com/xz44rxmu
The LOST Episode! STUMPED? Q&A: Safely Routing Large Profiles on Small Wooden Circles
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/bdy8cTpFDP4
This was supposed to be the mid-week follow-up to last weekend's video on routing the edges of small circles. If you missed it, be sure to catch it here: https://youtu.be/zPKVNuLsb6g
Criminally Overlooked Joinery Machine You Probably Never Heard Of
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/hnGVQXQrMaA
The "Joint-Matic" was a stand-alone router-based tool that was produced by Shopsmith in the 90's. It was a reimagining of an earlier, expensive, and frankly overbuilt tool known as the "Strong Designs Joint-Matic", and was criminally overlooked by non-Shopsmith woodworkers who assumed that it must be a toy. Boy, were they wrong. This is the first of a short series of videos on this versatile tool and there's lots more to come, including how to use it to make a complete raised panel door. Is it as versatile as Matthias Wandel's Pantorouter? Nope. But then again you don't have to build it or pay $1000+ for it!
STUMPED? Q&A: Shopsmith Joint-Matic Introduction
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/EtwXQ3QNf4c
This is the follow-up to this past weekend's video. If you missed it, catch it here: https://youtu.be/hnGVQXQrMaA The "Joint-Matic" was a stand-alone router-based tool that was produced by Shopsmith in the 90's. It was a reimagining of an earlier, expensive, and frankly overbuilt tool known as the "Strong Designs Joint-Matic", and was criminally overlooked by non-Shopsmith woodworkers who assumed that it must be a toy. Boy, were they wrong. This is the first of a short series of videos on this versatile tool and there's lots more to come, including how to use it to make a complete raised panel door. Is it as versatile as Matthias Wandel's Pantorouter? Nope. But then again you don't have to build it or pay $1000+ for it!
Introducing the New Shopsmith Mark 4!
My Growth Rings with Scott Markwood
Watch it here: https://youtu.be/l2ukWComqyQ
The Shopsmith Mark 4 is a new stripped-down 4-in-One multipurpose machine that can be used as starting point for Shopsmith woodworking for those who want to start with a factory-fresh and fully warrantied tool.
STUMPED? Q&A: The New Shopsmith Mark 4 with Tom from "Woodshop Nerdery"
My Growth Rings with Scott Markwood & special guest Thomas Purk from Woodshop Nerdery
Watch it here: https://youtu.be/m4lbHl3bNMg
Joining me for this follow-up Q&A for the Shopsmith Mark 4 introduction video is Youtuber Tom, from Woodshop Nerdery. If you aren't yet subscribed to Tom, it's time to remedy that situation! Click here: https://www.youtube.com/c/woodshopner...
If you missed the previous introduction video, catch it here: https://youtu.be/l2ukWComqyQ
The Shopsmith Mark 4 is a new stripped-down 4-in-One multipurpose machine that can be used as starting point for Shopsmith woodworking for those who want to start with a factory-fresh and fully warrantied tool.
Re: My Growth Rings with Scott Markwood
Great episode and great crossover with the Nerdery show. Throughout the video I was in solid agreement with at least one of you all the time. I was not surprised to hear about so many professionals enjoying woodworking and the appeal of a Shopsmith to them, I have met so many of them over the years. Coming out of the systems software world the polymorphic functionality of the Shopsmith had great appeal to me, maybe others felt the same, or also like me simply thought they were cool.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: My Growth Rings with Scott Markwood
I don't know that these guys sold a lot of Mark 4's in that video but I was worried that Scott advertising the Power Station (etc.) caster sets on sale might cause a run on them. IIUC these are the same as M5 casters plus adapter plates, someone that knows please confirm. And they are somewhat less pricey than standard M5 casters, which are also on sale but at a higher price. (Makes no sense if the caster assemblies are the same, but...)
- David
- David