My Ultimate Shopsmith Storage Solution
Moderators: HopefulSSer, admin
My Ultimate Shopsmith Storage Solution
[ATTACH]3135[/ATTACH] [ATTACH]3136[/ATTACH] [ATTACH]3137[/ATTACH]
[ATTACH]3138[/ATTACH] [ATTACH]3139[/ATTACH]
I mentioned a couple of times that I was working on a storage cabinet to hold my SS SPTs and accessories. I finally finished it yesterday. My goal was to have all of my SPTs in one place that was conveniently located to my Shopsmith. This cabinet will be located within 5 feet.
This thing holds a ton. I revised various parts a couple of times trying to get it just right for me. I am very happy with the outcome.
The SPTs are mounted on pull out trays supported by full extension drawer slides. I added a drawer to hold the various small parts, measuring tools, etc. The inside is lined with pegboard that is accessible from both the inside and from the sides which open up. The sides are actually doors that open and provide additional storage as you can see. They are each mounted on 4 heavy duty concealed hinges. The outside of the left door holds the connector tubes and floating tables.
The dimensions are 42" wide, 22" deep, and 91" tall. This equates to about 6.4 square feet of floor space which is much more efficient than my old method of placing them wherever I could find an empty spot.
The first pictures are in this post. Additional pictures follow.
[ATTACH]3138[/ATTACH] [ATTACH]3139[/ATTACH]
I mentioned a couple of times that I was working on a storage cabinet to hold my SS SPTs and accessories. I finally finished it yesterday. My goal was to have all of my SPTs in one place that was conveniently located to my Shopsmith. This cabinet will be located within 5 feet.
This thing holds a ton. I revised various parts a couple of times trying to get it just right for me. I am very happy with the outcome.
The SPTs are mounted on pull out trays supported by full extension drawer slides. I added a drawer to hold the various small parts, measuring tools, etc. The inside is lined with pegboard that is accessible from both the inside and from the sides which open up. The sides are actually doors that open and provide additional storage as you can see. They are each mounted on 4 heavy duty concealed hinges. The outside of the left door holds the connector tubes and floating tables.
The dimensions are 42" wide, 22" deep, and 91" tall. This equates to about 6.4 square feet of floor space which is much more efficient than my old method of placing them wherever I could find an empty spot.
The first pictures are in this post. Additional pictures follow.
- Attachments
-
- Front.jpg (79.61 KiB) Viewed 30144 times
-
- Left Side.jpg (59.66 KiB) Viewed 29866 times
-
- Left Door Storage.jpg (112.89 KiB) Viewed 29845 times
-
- Drawer.jpg (159.11 KiB) Viewed 29775 times
-
- Saw Blade & Shaper.jpg (89.89 KiB) Viewed 29858 times
[ATTACH]3140[/ATTACH] [ATTACH]3141[/ATTACH]
[ATTACH]3142[/ATTACH] [ATTACH]3143[/ATTACH]
Additional pictures.
[ATTACH]3142[/ATTACH] [ATTACH]3143[/ATTACH]
Additional pictures.
- Attachments
-
- Strip Sander Extension Table.jpg (163.51 KiB) Viewed 29718 times
-
- Middle Tray.jpg (160.47 KiB) Viewed 29647 times
-
- Clamps & Featherboards.jpg (101.33 KiB) Viewed 29647 times
-
- Drum Sander Router Bit Storage.jpg (78.96 KiB) Viewed 29663 times
- dusty
- Platinum Member
- Posts: 21371
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
The Ultimate Shopsmith Storage Solution
This looks to be a excellent solution to your storage needs. It not only organizes everything by giving it a home but it protects. Congratulations on a job well done.
The only criticism might me height and that would only be applicable for a shorty like myself. It appears that the jointer would hit me at about chest height and might be a bit difficult for me to manhandle (manage without dropping).
The only criticism might me height and that would only be applicable for a shorty like myself. It appears that the jointer would hit me at about chest height and might be a bit difficult for me to manhandle (manage without dropping).
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
It is a little taller than I would have liked but when I took measurements it pretty much dictated the height for me. I'm 6'2" so the jointer hits me a little over waist high. I put it on the middle shelf so I wouldn't have to bend for the bottom or be a weight lifter for the top.dusty wrote:This looks to be a excellent solution to your storage needs. It not only organizes everything by giving it a home but it protects. Congratulations on a job well done.
The only criticism might me height and that would only be applicable for a shorty like myself. It appears that the jointer would hit me at about chest height and might be a bit difficult for me to manhandle (manage without dropping).
You could probably build 2 sections side by side half height. It would take up more floor space but could work for a shorter cabinet.
For those interested, I also posted this project at Lumberjocks here:
http://lumberjocks.com/projects/13258
Looks great and usable. A job well done.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob