Well I did it!!! I obligated...
Moderators: HopefulSSer, admin
Re: Well I did it!!! I obligated...
Good of your son to see that you needed help and wanted to get goin on the project
I hope you heal quickly - and congrats on the new tool .
b
I hope you heal quickly - and congrats on the new tool .
b
Re: Well I did it!!! I obligated...
Congratulations! It’s so clean and beautiful. Enjoy.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Well I did it!!! I obligated...
I am happy to see it is assembled and ready for some use. I hope you will get to check it out as you recover.
David,
Can you post a picture of your double tilt ends to show the difference you referred to?
David,
Can you post a picture of your double tilt ends to show the difference you referred to?
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Well I did it!!! I obligated...
I'm with Russ David. Lets see the difference between the two. Send us some pix.chapmanruss wrote: ↑Sun Dec 19, 2021 1:35 pm
David,
Can you post a picture of your double tilt ends to show the difference you referred to?
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
- JPG
- Platinum Member
- Posts: 34644
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Well I did it!!! I obligated...
Who gonna provide the earlier versions?
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Well I did it!!! I obligated...
DLB had asked for pictures of my double tilt bases because he wanted to compare them to his. Of which he suspected were different. So I provided them but would like Russ I'd like to see what that difference is.
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Well I did it!!! I obligated...
JPG,
You know me, I like to see any changes made in the Shopsmith Tool and accessories. My Double Tilt Bench Ends that I bought a few years ago look like the OP's (KCollins). David (DLB) has said his are different and he bought them two years ago. I am curious to see the difference.
You know me, I like to see any changes made in the Shopsmith Tool and accessories. My Double Tilt Bench Ends that I bought a few years ago look like the OP's (KCollins). David (DLB) has said his are different and he bought them two years ago. I am curious to see the difference.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Well I did it!!! I obligated...
Mine are like this:
There is a plate or bar, Aluminum IIRC, inside threaded for the two mounting screws and for the lock/unlock screw. The casting itself is not threaded. The difference, I think, is that mine appear to be made from a 'traditional' Base Arm while the newer ones might (?) be a different casting. Otherwise, my knobs have double start threads and there is an o'ring to keep them from vibrating out. I think that is common among the designs. Very unclear to me why mine are different from both older and newer versions. Until I saw the OP's I thought these were latest and greatest.
- David
There is a plate or bar, Aluminum IIRC, inside threaded for the two mounting screws and for the lock/unlock screw. The casting itself is not threaded. The difference, I think, is that mine appear to be made from a 'traditional' Base Arm while the newer ones might (?) be a different casting. Otherwise, my knobs have double start threads and there is an o'ring to keep them from vibrating out. I think that is common among the designs. Very unclear to me why mine are different from both older and newer versions. Until I saw the OP's I thought these were latest and greatest.
- David
Re: Well I did it!!! I obligated...
Oh yeah that's interesting. I should move my Mark 7 into drillpress mode and have a look inside.
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
- chapmanruss
- Platinum Member
- Posts: 3488
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Well I did it!!! I obligated...
Here is a picture of the Tilt End Lock Knob in the casting. I unscrewed it a bit so you can see the extra material molded around the threaded hole.
_
_
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.