Heads Up - Bargain 'available'
Moderators: HopefulSSer, admin
Re: Heads Up - Bargain 'available'
https://washingtondc.craigslist.org/mld ... 83819.html
Dealer owned Mark 7, Magna bandsaw and jointer at 500
Documentation that accompanies it looks pretty interesting too
Dealer owned Mark 7, Magna bandsaw and jointer at 500
Documentation that accompanies it looks pretty interesting too
Re: Heads Up - Bargain 'available' -Dealer's Manual?
Old Mark VII. Note that the listing says the seller's grandfather was a dealer and a "dealer's manual" is included.
https://washingtondc.craigslist.org/mld ... 83819.html
https://washingtondc.craigslist.org/mld ... 83819.html
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Heads Up - Bargain 'available'
Mark VII with bandsaw and jigsaw, $450.
North of Santa Barbara, almost to San Luis Obispo.
https://santamaria.craigslist.org/tls/d ... 74290.html
North of Santa Barbara, almost to San Luis Obispo.
https://santamaria.craigslist.org/tls/d ... 74290.html
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Heads Up - Bargain 'available'
- Attachments
-
- Goldie Mounting Base
- F6613688-3CE9-4B37-9A98-B44BCFE7D029.jpeg (205.16 KiB) Viewed 4653 times
Re: Heads Up - Bargain 'available'
Overarm Pin Router - $350 in Fountain Valley, CA (which is a little bit south of Los Angeles).
https://orangecounty.craigslist.org/tls ... 31143.html
.
https://orangecounty.craigslist.org/tls ... 31143.html
.
Marc Jones
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Model 10ER (1952), s/n: 72883 (MickyD restored in 2009/10) / Variable Speed Changer / A-34 Jigsaw / Jointer-Shaper Fence
Mark 5 Model 500 (1955), s/n: 309828 (MickyD restored in 2008/09) / Magna Jigsaw Model 610, s/n 65001 / Yuba 11” Bandsaw Model 630, s/n 39807 / Magna Jointer Model 620, s/n 17792 (restored in 2021) / Magna 6” Belt Sander Model 640, s/n 13742 (to be restored)
Professional Planer Model M5082, s/n 003918
DC3300 Dust Collector (circa 1998)
Re: Heads Up - Bargain 'available'
Mostly bare Mark 5, Sherborn, MA (25 mi southwest of Boston) - Free
Only accessories visible in photos and description are a saw blade and sanding disc. Way tubes look in reasonable shape and has casters.
https://boston.craigslist.org/bmw/tls/d ... 78151.html
Only accessories visible in photos and description are a saw blade and sanding disc. Way tubes look in reasonable shape and has casters.
https://boston.craigslist.org/bmw/tls/d ... 78151.html
- Attachments
-
- sherborn_ss500_free_600x450.jpg (37.31 KiB) Viewed 4572 times
Re: Heads Up - Bargain 'available'
Sawsmith 2000 on eBay: https://www.ebay.com/itm/224953322353?m ... nl%3Dmkcid
Owner says priced to sell at $200, and that's the minimum bid. It has the tubular 510 type rails and no extension tables shown so not worth an awful lot more than that. If you have one already you might want it for parts or to make a Frankensaw of some kind.
Owner says priced to sell at $200, and that's the minimum bid. It has the tubular 510 type rails and no extension tables shown so not worth an awful lot more than that. If you have one already you might want it for parts or to make a Frankensaw of some kind.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Re: Heads Up - Bargain 'available'
Getting ready to put my Mark V with the 520 upgrade up for sale. This was my first Shopsmith and I bought it with the understanding that I'd have limited space. That's no longer the case so I'm slowly moving to full size equipment. It's in good shape and runs well. It has quite a few goodies with it:
- 520 upgrade
- Bandsaw
- Jointer
- Strip sander
- Overhead router package
- Many small accessories, including sanding discs, replacement disc material, lathe centers, NIB bandsaw blades, t-nuts for the miter slots and 520 fence, chisel sharpening jig, etc.
I paid $1500 for it all and I'm hoping to recoup as much as possible, but open to offers. Located in Reno, NV.
- 520 upgrade
- Bandsaw
- Jointer
- Strip sander
- Overhead router package
- Many small accessories, including sanding discs, replacement disc material, lathe centers, NIB bandsaw blades, t-nuts for the miter slots and 520 fence, chisel sharpening jig, etc.
I paid $1500 for it all and I'm hoping to recoup as much as possible, but open to offers. Located in Reno, NV.
Re: Heads Up - Bargain 'available'
The Sawsmith 2000 listed above is now down to a minimum bid of $50, buy it now price of $100. This guy wants to get rid of this thing. Anybody in Riverside CA area could pick this up and sell it for parts. It's hard to bargain through eBay, they don't like direct contact between buyer and seller, but I bet this guy would give the machine away to someone who came and picked it up.
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Mk5 shop Smith for sale
Comes with the lathe, a couple different chucks, couple different tail pieces, jigsaw attachment, drill Chuck's, chisels, shaper fence, table saw, router and attachments, drum sander, disc sander, . The speed gear has been upgraded to steel, it's in great shape. Located in Meridian Idaho. If somebody's interested let me know I'll send you pictures