Free 10E or 10ER Parts

Moderator: admin

User avatar
chapmanruss
Platinum Member
Posts: 2828
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Free 10E or 10ER Parts

Post by chapmanruss »

Jwillbrick,

Welcome to the Shopsmith Forum. The Gauge Collar is often up for sale at online auctions. I found some with the Gauge Rod and nuts for currently sale on ebay. There is a Gauge Collar for sale by itself but is priced way more than the Gauge Collars with the Gauge Rod.
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. Mark 2 S/N 85959 restored. 10E S/N 1076 & others to be restored.
stew
Gold Member
Posts: 131
Joined: Fri Aug 29, 2008 12:01 am
Location: Downers Grove, IL

Re: Free 10E or 10ER Parts

Post by stew »

I do have the part you need- Private Message (PM) me so we can figure out how to get it to you.

Stew
SS parts 1.JPG
SS parts 1.JPG (428.01 KiB) Viewed 394 times
SS parts 2.JPG
SS parts 2.JPG (181.18 KiB) Viewed 394 times
Jwillbrick
Bronze Member
Posts: 5
Joined: Fri Aug 12, 2022 10:25 am

Re: Free 10E or 10ER Parts

Post by Jwillbrick »

Wow that’s fantastic Stew!
I’m kinda new to this site , not sure how the messaging works . My email is jwillbrick@yahoo.ca
Let me know how we can arrange this and I can send you some funds.
Cheers
Jwillbrick
Bronze Member
Posts: 5
Joined: Fri Aug 12, 2022 10:25 am

Re: Free 10E or 10ER Parts

Post by Jwillbrick »

Hey Stewart !


Just received the collar today !
Thanks again for your help to get me back running again!

Cheers
Attachments
9FE0EF4E-A300-48A7-AE04-554E006E780B.jpeg
9FE0EF4E-A300-48A7-AE04-554E006E780B.jpeg (402.65 KiB) Viewed 272 times
User avatar
JPG
Platinum Member
Posts: 33599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Free 10E or 10ER Parts

Post by JPG »

2.3.4.5 pulleys?
10 collar repaired.jpg
10 collar repaired.jpg (220.66 KiB) Viewed 260 times
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Jwillbrick
Bronze Member
Posts: 5
Joined: Fri Aug 12, 2022 10:25 am

Re: Free 10E or 10ER Parts

Post by Jwillbrick »

Was like that when I got it from my father .
Different size pulley for different speeds
User avatar
JPG
Platinum Member
Posts: 33599
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Free 10E or 10ER Parts

Post by JPG »

IIRC OEM pulleys are 2.3.4. You have a greater speed range. Take care of the headstock pulley - it has a non-standard bore(assuming the quill shaft is still OEM).
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
chapmanruss
Platinum Member
Posts: 2828
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Free 10E or 10ER Parts

Post by chapmanruss »

Jwillbrick.

Great to hear you got it back together. JPG is correct about the pulleys not being the OEM 2", 3" and 4" step pulleys that originally came on the Model 10E and 10ER. The Headstock pulley may be a custom made one to have the 13/16" bore required for the Drive Sleeve. It looks like the largest pulley slot is 4" and the smallest is 2" with the other two slots somewhere in between. This still has your highest speed at 3450 RPM's and the slowest at 860 RPM's with the others speeds somewhere in in the middle. The Model 10's were listed as a three-speed tool with an RPM of 1725 or direct motor speed having the belt on both 3" pulley slots. It is interesting, at least to me, is that there was never anything about using different pulley matchups to get additional speeds. The OEM three step pulleys are capable of 7 different speeds not just the three listed in all the Owner's Guides and other printed materials of 860, 1725 and 3450 RPM's. This only requires realigning the pulleys to matchup the 3"-4" or 2"-3" slots for additional speeds. On your Model 10ER having 4 step pulleys you have even more possible speeds. One thing I have found matching up the 3" and 4" slots on the OEM pulleys is that a 1 inch longer belt is needed. The attached PDF chart may be helpful in determining speeds for the different pulley combinations you may have. I am interested to know what the actual pulley step sizes are that you have.

_
Table of Speeds for Pulleys.pdf
(182.09 KiB) Downloaded 16 times
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E S/N 1077 oldest one I have restored. Mark 2 S/N 85959 restored. 10E S/N 1076 & others to be restored.
Jwillbrick
Bronze Member
Posts: 5
Joined: Fri Aug 12, 2022 10:25 am

Re: Free 10E or 10ER Parts

Post by Jwillbrick »

The pulley size are 4”,3.5”,2.75” ,and 2”
Post Reply