Hello from Michigan
Moderators: HopefulSSer, admin
-
- Gold Member
- Posts: 46
- Joined: Fri Jan 27, 2023 9:50 pm
- Location: Michigan
Hello from Michigan
Hello,
I was looking for a introduction topic, didn't find one so thought I would just post an intro here.
I just purchased my first Shopsmith, a Mark VII, Yuba American. Came with plenty of attachments, bandsaw/router table, blade for table saw etc. Unit to me is in good working condition, speed cam is aluminum, dials and responds. Only issue I see coming is the rack gear plastic and some damage.
I found a manual on-line, should arrive in the next few days.
Looking forward to some fun projects.
Tom
I was looking for a introduction topic, didn't find one so thought I would just post an intro here.
I just purchased my first Shopsmith, a Mark VII, Yuba American. Came with plenty of attachments, bandsaw/router table, blade for table saw etc. Unit to me is in good working condition, speed cam is aluminum, dials and responds. Only issue I see coming is the rack gear plastic and some damage.
I found a manual on-line, should arrive in the next few days.
Looking forward to some fun projects.
Tom
- JPG
- Platinum Member
- Posts: 34647
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Hello from Michigan
Magna American!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
- Gold Member
- Posts: 46
- Joined: Fri Jan 27, 2023 9:50 pm
- Location: Michigan
Re: Hello from Michigan
Welcome to the forum. Here is a link to a recent thread on replacement rack pieces on Ebay and how to replace the rack.
viewtopic.php?t=31888
Also , you will find a ton of info on all things Shopsmith in Everett's, thread at the top of the maintenance and repair section.
Click the " Shopsmith Large Format drawings" thread ,then click the RED "my Google Drive". There you will find all things SS info including a section on the 1960's SS Mark VII's.
viewtopic.php?t=31888
Also , you will find a ton of info on all things Shopsmith in Everett's, thread at the top of the maintenance and repair section.
Click the " Shopsmith Large Format drawings" thread ,then click the RED "my Google Drive". There you will find all things SS info including a section on the 1960's SS Mark VII's.
SS Mark VII(sn 405025), SSband saw, SS 4" jointer, Older SS Mark V w/DC treadmill motor,
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
-
- Gold Member
- Posts: 46
- Joined: Fri Jan 27, 2023 9:50 pm
- Location: Michigan
Re: Hello from Michigan
Thank you lahola1,
I will check out the links and information, much appreciated!!
I will check out the links and information, much appreciated!!
-
- Gold Member
- Posts: 46
- Joined: Fri Jan 27, 2023 9:50 pm
- Location: Michigan
-
- Gold Member
- Posts: 46
- Joined: Fri Jan 27, 2023 9:50 pm
- Location: Michigan
Re: Hello from Michigan
Sorry figuring out how to get pictures in, SS I just purchased.
Re: Hello from Michigan
looks nice Tom. Pretty much like mine except it looks like you have a different start switch. No big deal as long as it works for you.
Hope you have table, rip fence and miter gauge there someware
Hope you have table, rip fence and miter gauge there someware
SS Mark VII(sn 405025), SSband saw, SS 4" jointer, Older SS Mark V w/DC treadmill motor,
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
-
- Gold Member
- Posts: 46
- Joined: Fri Jan 27, 2023 9:50 pm
- Location: Michigan
Re: Hello from Michigan
Yes it came with table, rip fence, miter, blade, then fence for the band saw, table extension, several chucks, live end, flat grinding wheel, several size round sanding drums, and some other chucks. I'll get out tomorrow and get a few more pictures.
Question, is there a better place for me to post than here in the community forum? Sorry learning my way...
Re: Hello from Michigan
Glad you have all that stuff especially the table and rip fence as they are pretty hard to come by nowadays; sometimes they come up on ebay. Most SS mark V works with the MKVII but some things are unique to the MarkVII only.
Posting here is fine unless you have maintenance or woodworking comments/ questions, then post in the other sections.
Posting here is fine unless you have maintenance or woodworking comments/ questions, then post in the other sections.
SS Mark VII(sn 405025), SSband saw, SS 4" jointer, Older SS Mark V w/DC treadmill motor,
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer
Smithy SuperShop 720, Powerkraft RAS,Craftsman RAS, Ridgid TS2412 Table Saw,
Delta 12" planer