Turning firewood into a Birdhouse. The birds are chirping away seems like a good time to hang a birdhouse.
Band Saw Bird House
Moderator: admin
Band Saw Bird House
Glenn
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
Re: Band Saw Bird House
I've never seen one done that way and I like it! What a fun project!
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!
Re: Band Saw Bird House
That is a neat bird house/project!
Coincidently I am building bird houses right now and if I may, I might try this in the future. I have some small apple and elm logs that are from trees cut on our property a couple of years ago.
I'll try to post pictures when I finish my current house.
John
Coincidently I am building bird houses right now and if I may, I might try this in the future. I have some small apple and elm logs that are from trees cut on our property a couple of years ago.
I'll try to post pictures when I finish my current house.
John
- BuckeyeDennis
- Platinum Member
- Posts: 3560
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Band Saw Bird House
I like it! Keep it natural.
I had a big old ash-borer killed ash tree finally uproot this winter. It was in tbe woods, but the tree crown fell into my front yard. After I cleaned up the brush and cut the firewood, the fresh-cut stump pointing at my house was a bit of an eyesore.
I had a dim recollection of a natural “stain” made by dissolving steel wood in vinegar. So I stole about a cup if my wife’s vinegar, and threw in a small chunk of steel wool. After a week or so, the steel wool had disappeared, and I used a junk paintbrush to coat the raw stump cut with the vinegar solution. A week or less after that, the fresh-cut surface of the stump had turned a nice dark gray, looking as if it had been weathering for years.
So if you want the fresh-cut surfaces if your rustic birdhouse to also look rustic, that could be a very cheap and easy technique.
I had a big old ash-borer killed ash tree finally uproot this winter. It was in tbe woods, but the tree crown fell into my front yard. After I cleaned up the brush and cut the firewood, the fresh-cut stump pointing at my house was a bit of an eyesore.
I had a dim recollection of a natural “stain” made by dissolving steel wood in vinegar. So I stole about a cup if my wife’s vinegar, and threw in a small chunk of steel wool. After a week or so, the steel wool had disappeared, and I used a junk paintbrush to coat the raw stump cut with the vinegar solution. A week or less after that, the fresh-cut surface of the stump had turned a nice dark gray, looking as if it had been weathering for years.
So if you want the fresh-cut surfaces if your rustic birdhouse to also look rustic, that could be a very cheap and easy technique.
Re: Band Saw Bird House
I live in the Mohave desert in a wet year we get something like an inch of rain so a flat top birdhouse is ok but in a snowy, rainy part of Quebec a birdhouse with a slanted roof may be more appropriate.john wrote: ↑Fri Mar 17, 2023 9:16 pm That is a neat bird house/project!
Coincidently I am building bird houses right now and if I may, I might try this in the future. I have some small apple and elm logs that are from trees cut on our property a couple of years ago.
I'll try to post pictures when I finish my current house.
John
Glenn
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
I create problem solving challenges and opportunities for design modification, not mistakes.
SS 520 born 04/16/03, Power Station mounted Band saw , Scroll saw, Jointer, Belt sander, Overarm router, dedicated Mark V drill press, SS Maxi-clamp system, Shopsmith woodworking bench
Re: Band Saw Bird House
Thanks for the reminder. I hadn't really thought of that.
All the bird houses I have made so far have peaked or rounded roofs but I will keep your suggestion in mind if I attempt a house from a log.
I have used the band saw technique to make music boxes for a couple of great grand daughters so I am familiar with the process using flat wood.
John
All the bird houses I have made so far have peaked or rounded roofs but I will keep your suggestion in mind if I attempt a house from a log.
I have used the band saw technique to make music boxes for a couple of great grand daughters so I am familiar with the process using flat wood.
John
Re: Band Saw Bird House
Looking at the logs I have to make something like that. Not much but pine left on the property right now but I
Ed from Rhode Island
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER